Sony DCR-IP7E User Manual page 47

Using e-mail
(3) Select [Receive], then press the centre z on the control button.
The screen for verifying the connection appears.
Set the Bluetooth device to connection standby with the camcorder
beforehand. For details, refer to the operating instructions supplied with the
Bluetooth device.
(4) Check the telephone number.
When dialling other telephone numbers
Select [TEL No.], then press the centre z on the control button. The registered
telephone number list appears. Select the desired telephone number, then
press the centre z on the control button. The selected telephone number is
specified.
(5) Select [Connect], then press the centre z on the control button.
The camcorder starts dialling the selected telephone number. When an e-mail
message has been sent to you, the camcorder download it, and the message
"Receiving Mail Complete" appears. Select [OK], then press the centre z on
the control button. The phone line is automatically disconnected.
,
,
47-
GB