Advertisement
Quick Links
"WS01"
WATCHWINDER
I
N S T R U C T I O N S M A N U A L
(ENG)
To enable smooth and proper operations, please carefully read and preciously keep this notice
for future perusal.
This INSTRUCTION MANUAL is available in different languages.
Check online LEANSCHI.com/ DOWNLOADS for further languages & updates.
Advertisement
Summary of Contents for Leanschi WS01
- Page 1 N S T R U C T I O N S M A N U A L (ENG) To enable smooth and proper operations, please carefully read and preciously keep this notice for future perusal. This INSTRUCTION MANUAL is available in different languages. Check online LEANSCHI.com/ DOWNLOADS for further languages & updates.
- Page 2 BOOST and SLEEP functions are advanced and specific features you will find built-in some LEANSCHI watchwinders. Make sure you properly use them to avoid troubleshooting. Our team and/or our official retailers remain at your disposal in case of questions or remarks related to this device’s operations.
- Page 3 TECHNICAL FEATURES | WS01 1034 POWER ADAPTOR: IN: 100-240V – OUT: 3V, 1,2A BATTERIES 2x ALCALINE “AA” - LR06 ADJUSTABLE NUMBER of ROTATIONS 650 – 800 - 1.000 - 1.900 or “BOOST” per DAY (TPD=Turns Per Day): BOOST FUNCTION: DIRECTION SELECTION:...
- Page 4 FRONT BACK BATTERIES compartment 2x LR06 -„AA“ A/C PLUG-IN SERIAL CONTROL LED WATCH-HOLDER OFF + DIRECTION PLUG-OUT* button button serial plug to link up to 3 winders to a single A/C adaptor...
- Page 5 REMOVING / PUTTING your WATCH onto the WATCHWINDER To REMOVE the watch-holder from the watchwinder, firmly PRESS on both watchholder’s ears and PULL out of the winder-barrel. To PLUG the watch-holder back into its barrel, firmly PRESS on both holder’s ears and gently PLUG-IN the holder into the 2 sides-holes on the winder’s barrel.
-
Page 6: Important Notes
IMPORTANT NOTES Only use the A/C adaptor which has been delivered with your watchwinder. Never open or dismantle the winder nor unscrew its body or case. Always STOP the winder before you remove / insert a watch. Beware: The non-observance of those recommendations may lead to guarantee cancellation. FURTHER RECOMMENDATIONS Do not expose your watchwinder to direct sun-rays Do not locate it close to a source of heat (It may not only damage your device;... - Page 7 SWITCH-ON the main SWITCH / “DIRECTION” button, and select the WINDING motion: CLOCK-WISE, ANTI-CLOCKWISE or BOTH DIRECTIONS Using our optional CONNECTING CABLE, you can link a 2 winder (plug “IN”) with your MAIN winder (plug “OUT”), using a single A/C adaptor for up to 3 watchwinders “WS01”.
- Page 8 SLEEP FUNCTION 12 hours after it has started operation, your winder will stop for the consecutive next 12 hours (i.e. night sleep). Programming your winder just before 9 o’ clock in the morning would make it stop during the night from 21:00 onward to 9:00 on the next day. This function is useful to keep your watchwinder noiseless during the night if you have it in your bedroom.
-
Page 9: Operating Modes
OPERATING MODES “TPD” = Turns Per Day or the number of full rotations within a day (24 hours). TPD 650 Winder is rotating for 1 minute and rest for 472 seconds before re-starting the same cycle TPD 800 Winder is rotating for 1 minute and rest for 347 seconds before re-starting the same cycle TPD 1000 Winder is rotating for 1 minute and rest for 286 seconds before re-starting the same cycle TPD 1950... -
Page 10: Troubles Shooting
CLOCKWISE, ANTICLOCKWISE or in both DIRECTIONS. Adapt your settings in accordance. 3. Wind-up 10-20 times your watch crown before you put it on your watchwinder For any further troubles, never hesitate to ask our authorized LEANSCHI retailer. Check the nearest retailer’s location under leanschi.com For our ENVIRONMENT sake, never dispose old batteries in the regular waste-bin.