Step 3: Turning The Power On, And Setting The Date And Time - Sony Handycam DCR-DVD610 Operating Manual

Step 3: Turning the power on, and setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
Touch the button on the LCD screen.
POWER switch
1
While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
Go to step 3 when you turn on your
camcorder for the first time.
2
Touch (HOME) t
(SETTINGS) t [CLOCK/
LANG] t [CLOCK SET].
The [CLOCK SET] screen appears.
3
Select the desired geographical
area with /
[NEXT].
4
Set [DST SET] or [SUMMERTIME],
then touch [NEXT].
5
Set [Y] (year) with
6
Select [M] with
the month with
7
Set [D] (day), hour and minute in
the same way, then touch [NEXT].
8
Make sure that the clock is
correctly set, then touch
The clock starts.
You can set any year up to the year
2037.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
To turn off the power
Turn the POWER switch to OFF (CHG).
, then touch
/ .
/ , then set
/ .
.
Continued ,
25