Summary of Contents for Z-Wave Alliance CIT
- Page 1 CERTIFIED INSTALLER TOOLKIT (CIT) QUICK START GUIDE V1.7 October, 10, 2018 CIT Basis: v2.3.6-rc7 400 West Cesar Chavez Austin, TX 78701 USA Z-WaveAlliance.org...
- Page 2 Welcome! The Z-Wave Alliance’s Certified Installer Toolkit (CIT) is designed to help with the installation and diagnostics of a Z-Wave network. Use of this tool should only be undertaken by certified Z-Wave installers or trained technicians who have taken the Z- Wave Certified Installer training and understand the fundamentals of Z-Wave.
- Page 3 The tool requires power through the Micro USB Power jack located on the side of the unit. Plug a micro USB power adapter into the jack to use the unit. If you need to use the CIT while mobile, you may use a mobile power pack such as the ones used to power mobile phones.
- Page 4 Getting to the User Interface The CIT has a built-in web server. Using the tool is as easy as using a web browser to access a web page. To get to the web page, you have to know the IP address of the web server that you want to connect to.
- Page 5 Note: The web server for the CIT is not on the default port 80, so once you have the IP address, you must append :8083 to access the user interface of the CIT. The link at the FindCIT website above takes care of this for you.
- Page 6 If you were successful in getting connected to the CIT, the registration page (if the CIT has not been registered previously) or the CIT login page will be displayed. The CIT registration page will look similar to this: Please register your CIT to the person who will be using it. Registration is done by entering your Z-Wave Alliance member site username and password, and then entering a unique CIT identifier.
- Page 7 If the registration was successful, you will be taken to the Home Page of the CIT. Please continue by clicking on the User Guide button on the Home Page to view the more detailed User Guide. If you were UNABLE to get to the main screen shown above, please contact the distributor...