Panasonic TH-50PD12U Service Manual page 27

21. Remove the flexible cables from the connectors (C10,
C20, C22, C32).
22. Remove 12 screws.
23. Pull the bottom of the Plasma Display Panel forward
(arrow1).
24. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
25. Remove the Rear Cover Hook Left and Right from the
Plasma Display Panel.
26. Remove the 8 Rear Cover Spacers and Rear Cover
Spacer Rings from the Plasma Display Panel.
Caution:
• Please confirm the installation place of Rear Cover Hook
Left and Right, Rear Cover Spacer and Rear Cover
Spacer Ring when you exchange the Plasma Display
Panel, and install them in an original installation place
after exchanging the Plasma Display Panel.
27
TH-50PD12U