Installation And Comissioning; Mechanical Installation - Andrew MRx18/x18 User Manual

4 Installation and Comissioning

4. INST ALLATION AND COMISSIONING

4.1. MECHANICAL INSTALLATION

To mount the MRx18 to a wall, proceed as follows:
MRx18
miniRepater
1. Fasten the
bracket by means of 2 proper
screws (through the pressed-
in thread nuts) to a wall. (The
screw type depends on the
quality of your wall).
Wall
behind
bracket
rear side
2. Insert the mRx18 to the wall-mounting bracket.
3. Fasten the MRx18 and wall-mounting bracket by means of 2 metric M5x50 fillister-
head screws to the wall.
wall-mounting
figure 4-1 Wall-mounting bracket
figure 4-2 Wall mounting procedure
Wall-mounting bracket
2 thread nuts
front side
2 M5x50 screws
Wall
Wall
Page 15