z
Selecting the priority face (Tracking focus)
Normally the camera automatically selects the face to focus on according to the [Face
Detection] setting, but you can also select a face to be given priority.
1Press z on the control button during Face Detection.
2Place the target frame over the detected face, and press z.
3To cancel face priority, press z again.
• It may not be possible to detect the selected face correctly depending on the surrounding brightness,
the subject's hairstyle, etc. In this case, select the face again under the conditions where the image
will be shot.
• When the Smile Shutter function is used with the Face Detection frame selected, Smile Detection is
performed only on the selected face.
• You cannot select the priority face in Easy Shooting mode or when the self-timer is set to [Self-
portrait One Person] or [Self-portrait Two People].
The target frame appears.
The frame changes to an orange
.
60
GB