Summary of Contents for HL-Tech WL-3002
- Page 1 WLAN 802.11 b/g MiniPCI WL-3002 Hardware Installation and Configuration Utility User’s Guide Integrated Baseband and MAC Solution IEEE 802.11b/g WLAN...
-
Page 2: Table Of Contents
WL-3002 User’s Manual Contents: Table of Contents . .……….………..……….…………...2 ……… Introduction ………… …………………………..3 … ………… … Install the WLAN card in PC/NB …….……….….………..4 …… Install WL-3002 driver…….………………….…….…………..5 Setup WL-3002 Configuration Utility… ……….…………….7 … HL-TECH Corporation... -
Page 3: Introduction
WL-3002 User’s Manual Introduction The Wireless LAN Configuration Utility is a powerful application that helps you to configure this WLAN card and monitor the statistics of the communication status. Unlike the standard method of configuring the card via the operating system utilities, this application permits the dynamic modification of the configuration parameters while the card is operating. -
Page 4: Install The Wlan Card In Pc/Nb
WL-3002 User’s Manual Install the WLAN card in PC/NB Release the screw from PC/NB Find out the pre-wired cable Connect the cable with Mini-PCI Align and firmly plug the Mini-PCI card into the slot. Re-place the cover to PC/NB Secure the screw with a cross screwdriver. -
Page 5: Install Wl-3002 Driver
WL-3002 User’s Manual Install WL-3002 driver The program will automatically proceed with Press “Next” to continue installing. Press “Browser” to change the folder where setup Select or create a program folder and press will install files or press “Next” to continue. - Page 6 WL-3002 User’s Manual Insert the Wireless Card to slot of NB and c hoose Press “Continue” to continue the process. “Install the software automatically (Recommended)” and press “Next”. Press “Finish” to complete the installation HL-TECH Corporation...
-
Page 7: Setup Wl-3002 Configuration Utility
User’s Manual Setup WL-3002 Configuration Utility 1. Station: Figure 1-1 Open the WL-3002 Configuration Utility shown as Figure 1-1. The adapter can be set at “Station” or “Access Point” Mode from the Mode drop down menu. Station mode is selected for the item. - Page 8 WL-3002 User’s Manual 1.1 More Setting Press “Connetc this site “ in Figure 1-1to enter “More setting“ window. Figure 1-2 1.1.1 “General Connection Setting” group: Read the current status from the group if the “Change” button is not pressed. Press “Change” button for modifying the status, when the modification is finished, press “Apply”...
- Page 9 WL-3002 User’s Manual 1.1.2 Encryption Setting 1.1.2.1 WEP Key Setting Setting” in Figure 1-2 to enter the Press “WEP Encryption “WEP Key Setting” page Figure 1-3 Select the “Open System” , “Shared Key” mode or “Auto” from the “authentication Mode” drop down menu.
- Page 10 WL-3002 User’s Manual 1.1.2.2 WPA Setting Press “WPA Encryption Setting” in Figure 1-2 to enter the “WPA Setting” page Figure 1-4 You can select the WPA authentication protocol “TLS” or “PEAP” from “Protocol” filed. The is used , the User name...
- Page 11 WL-3002 User’s Manual Setup Profile Group: 1.1.3 Figure 1-5 Select the profile that has been saved previously from the “Profile name” drop down menu, then press “Load ” button to load the status to use. Write the profile name on the field of “Profile...
- Page 12 WL-3002 User’s Manual Setup Other Group: 1.1.4 Press “Advanced setting” in Figure 1-2 to enter the “Advanced setting” page. Figure 1-6 Select the Window User Interface by the “Language” down drop menu. If the English item is selected, all functions of window are described with English. Select Traditional Chinese item, and they are described with Traditional Chinese.
- Page 13 WL-3002 User’s Manual 2. Access Point Figure 2-1 Open the WL-3002 Configuration Utility shown as Figure 2-1. For the soft AP, please option the “ Access Point” from drop down menu Mode filed. “Network Adapter” shows the available WLAN card for soft AP.
- Page 14 WL-3002 User’s Manual 2.1 Access Point Setting Press “More Setting” in Figure 2-1 to enter the “Access Point Setting” page. Figure 2-2 Select the “Open System” or “Shared Key” mode from the “authentication Mode” drop down menu. At “Fragment” bar, drop and move cursor to set the fragmentation threshold point, the range is from 256 to 2346 (Disable) bytes.
- Page 15 WL-3002 User’s Manual 2.1.1 WEP Key Setting Press the “Setting” icon of WEP in Figure 2-2 to open the “WEP key setting” shown as Figure 2-3. Figure 2-3 Modify the contents of “WEP Key setting”, when it is finished, press “Apply” to save it.
- Page 16 WL-3002 User’s Manual 2.1.2 Access Point Setting Press the “Setting” icon of MAC Address Filter to enter access point setting to fill the MAC addresses that will be accepted or filtered.. Figure 2-4 Select “Disable” or “Accept” or “Filter” from the filed of drop menu “Filter...
- Page 17 20 cm may be maintained between the antenna and users. The final end product must be labeled in visible area with the following: “Contains TX FCC ID: SLH-WL-3002” End Product Manual Information The user manual for end users must include the following information in a prominent location “IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna...
Need help?
Do you have a question about the WL-3002 and is the answer not in the manual?
Questions and answers