Remove The Ss2-Board; Remove The Ss-Board; Remove The Hanger Metals And The Stand Brackets - Panasonic TX-P50S20B Service Manual

9.12. Remove the SS2-Board

1. Remove the Tuner unit. (See section 9.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-
connect the flexible cable (SS58).
3. Remove the screws (×2

9.13. Remove the SS-Board

1. Remove the Tuner unit. (See section 9.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS53 and SS56).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (×6
) and remove the SS2-Board.
) and remove the SS-Board.
9.14. Remove the Hanger metals and
the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the Stand brackets (L, R) fastening screws (×3
each) and the Stand brackets (L, R).
3. Remove the Hanger metals (L, R) fastening screws (×2
each) and remove the Hanger metals (L, R).
26