Page 1
LCD S830 Manual Control Panel User Manual The Latest Version 2018...
Page 2
1. Exterior Parameters Casing Material: ABS Display Material: High Hardness Acrylic (the same hardness value as tempered glass). Converter Ring φ 22.2mm 2. Single Supporter 2. Operating Voltage and Connections a. Operating Voltage: DC36v/48V Compatible (set by the control panel). b.
Page 3
3. Functions a. Display Speed Display, Motor Power Ratio Display, Battery Level Display, Error Indication, Total Mileage, Single Mileage, Single Running Time Light Signal b. Control and Settings Power Switch, 6km/h Inching Control, Wheel Diameter Setting, Top Speed Setting, Time Setting for Auto-Hibernation, Backlight Brightness Setting, Voltage Level Setting c.
Page 4
3.3 Multi-Functions Display Total Mileage: ODO Single Mileage: TRIP Single Running Time: Time Current Voltage VOL Operating Current: CUR DST: Unspecified 3.4 Vehicle Power PAS Lever 5 Levers Pedal Assist System 3. 5 Speed Display Maximum Speed: MAX Average Speed: AVG Measuring Unit: MPH or KM/H The panel will calculate the actual travelling speed based on the wheel diameter and signal data (number of magnet steel is needed for Hall motors).
Page 5
3.7 Settings P00: it is Reset all parameter Function: Change the value as 10, then short press the “M” key, the screen will Display all segment, then all parameter will reset to the original value P01: Backlight Brightness (1: darkest; 3: brightest) P02: Mileage Unit (0: KM;...
Page 6
4. Keys Arrangement of keys on the panel: Introduction of Keys Key operations involve short press, long press and long press of combination keys. Short press is used for short/frequent operations as: 1. Short press the UP or Down Button to change assist power/speed during riding.
Page 7
Long press or Press Throttle to exit the cruise mode when the vehicle is in cruise mode. Long press to turn on/off backlight 4. Turn on/off the LCD Panel When the display panel is operating, long press and it will be turn off, oth- erwise it will be turned on.