Advertisement
Step #3:
Once you have the forearm shell in the correct position,
secure the two forearm straps. Make sure they are secure so the
forearm shell does not migrate down over the bone at the wrist
(Fig #2).
Step #4:
In order to apply the hand strap, bring the back of the hand
and fingers up against the hand piece. Once they are positioned with
the hand centered under the hand piece, secure the hand strap.
Step #5: When all three straps are secure, remove the finger spring
from the hook on the wrist mount located on the forearm shell by
turning the hook a half-turn so the opening is facing to the side.
Remove the spring allowing the digit caps to fall down.
Advertisement
