Sony 4-114-858-12(1) Operating Manual page 25

To capture still images
1 Assign [PHOTO] to the ASSIGN 7/
PHOTO button (p. 44).
2 Press the ASSIGN 7/PHOTO button or
the PHOTO button on the Remote
Commander.
A still image will be recorded on the
"Memory Stick Duo."
when the recording is completed.
You can capture still images during
movie recording.
z Tips
• See page 138 for indicators that appear on the
screen during recording.
• You can assign [PHOTO] to another ASSIGN
button from (OTHERS)
BTN] and use that ASSIGN button as a PHOTO
button.
Capacity of the "Memory Stick Duo"
(MB) and the number of recordable
pictures
1.2M 0.9M
1440 × 1080 ×
810 810
1.2M
512MB 760 1000
1GB 1550 2100
2GB 3150 4300
4GB 6300 8500
8GB 12500 17000
16GB 25500 34500
b Notes
• Specifications are for Sony "Memory Stick
Duo." The actual number of recordable pictures
can vary depending on the recording
environment and the type of "Memory Stick
Duo."
• You cannot store a still image under the
following conditions:
– When the shutter speed is slower than 1/50.
– While using the fader
– While using [SMTH SLW REC]
– While using shot transition
disappears
t
[ASSIGN
VGA 0.2M
640 × 640 ×
480 360
2850 3600
5900 7300
12000 15000
23500 29500
48000 60000
97500 122000
• The unique pixel array of Sony's ClearVid
CMOS sensor and image processing system
(Enhanced Imaging Processor) allows for still
image resolution equivalent to the sizes
described.
z Tips
• Image sizes of still images are as follows:
– Recording in HDV format/DVCAM (DV)
format (16:9): 1.2M
– Recording in DVCAM (DV) format (4:3):
0.9M
– Playing back in HDV format: 1.2M
– Playing back in DVCAM (DV) format (16:9):
0.2M
– Playing back in DVCAM (DV) format (4:3):
VGA
To store still images captured from
movies on a tape on "Memory Stick
Duo"
You can capture an image in a movie and
record it on a "Memory Stick Duo" as a still
image. Be sure to insert a recorded tape and
a "Memory Stick Duo" in your camcorder.
1 Assign [PHOTO] to the ASSIGN 7/
PHOTO button (p. 44).
2 Set the POWER switch to VCR.
3 Press the N (play) button to search for
the scene you want to save as a still
image. Press the ASSIGN 7/PHOTO
button or the PHOTO button on your
Remote Commander at the scene.
b Notes
• The recorded date and time on the tape and the
stored date and time on the "Memory Stick
Duo" are both saved on the "Memory Stick
Duo." When you view the still images, only the
recorded date and time on the tape will be
displayed on the screen (Data code, p. 52).
• Camera data stored on the tape will not be
copied to the "Memory Stick Duo."
• You cannot store a still image during using your
camcorder with [PB ZOOM] set to [ON] (p. 91).
25