Page 1
Wireless ExpressCard Presenter (ExpressCard Size) User’s Guide Be sure to carefully read this User’s Guide first for the proper use of the Wireless ExpressCard Presenter and keep it for future reference. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written prior permission of the seller.
Page 2
IMPORTANT SAFETY AND HEALTH INFORMATION WARNING! RISK OF INJURY! Laser beam can cause permanent damage to eyes. Do not look into the laser beam or shine the laser beam into your eyes, other peoples’ eyes, or pet’s eyes. WARNING! RISK OF INJURY! Keep this device away from Children.
Page 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 4
An available USB port How to use the PCMCIA Card Boat The Wireless ExpressCard Presenter can be stored in the ExpressCard slot directly. In case your computer is equipped with PCMCIA slot, please place the Presenter in the boat and then store it in your PCMCIA card slot. Place the Presenter in the boat Take out the Presenter form the Insert the bottom of the USB receiver,...
Page 5
Operating the Wireless ExpressCard Presenter Front View Rear View Button with Function How to operate white character Press to emit the laser beam. LASER Press to start slide show. Slides Press to exit slide show. Press to go to next slide. Next Press to go to previous slide.
Page 6
Please see “How to pair the Wireless ExpressCard Presenter”. Fn + Link Change ID Note: Implement ID change ONLY when serious RF interference causes the remote control malfunction. Note: The low battery indicator on the Presenter will light up when the power is running low, it is probably time to replace battery whenever you see the low battery indicator lights up.
Page 7
Operating: 10%~85% RH Non-operating: 10%~95% RH Laser: Semiconductor laser(λ= 650 nm), emission duration: continuous Laser output power: Max. 0.95mW Note: Design and specifications are subject to change and improvement without notice. Patent Pending...
Need help?
Do you have a question about the PE1000 and is the answer not in the manual?
Questions and answers