Sony BDP-SX1 Operating Instructions Manual page 25

Portable blu-ray disc / dvd player
Hide thumbs Also See for BDP-SX1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
There is no sound or the sound is not
output correctly.
, Check that all the connecting cables are
securely connected.
, For HDMI connections, try the following:
Turn the player off and on again.
1
the connected equipment off and on again.
Disconnect and then reconnect the HDMI
3
cable.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
, The device connected to the HDMI OUT
jack does not support the audio format of
the player. Check the audio settings
(page 19).
, For HDMI connections, set "Audio
(HDMI)" to "Auto" in the "Audio Settings"
setup (page 19).
, When both the HDMI and the audio/video
cables are connected at the same time, no
signal is output from the AUDIO IN/OUT
jack. Disconnect the HDMI cable to enjoy
sound on the equipment connected with the
audio/video cable.
, The sound mode can be switched only for
the sound output from the player's speaker.
Only "Standard" is available for the sound
output from the HDMI or AUDIO IN/OUT
jack.
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
, When "Control for HDMI" is set to "On"
(page 21), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
"Control for HDMI" (BRAVIA
Sync)
The "Control for HDMI" function does not
work (BRAVIA Sync).
Turn
2
, Check that "Control for HDMI" is set to
"On" (page 21).
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set "Control for
HDMI" to "Off," then set "Control for
HDMI" to "On" (page 21).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is compatible
with the "Control for HDMI" function.
– the connected component's setting for
the "Control for HDMI" function is
correct.
The System Power-Off function does not
work (BRAVIA Sync).
, Check that "Control for HDMI" and
"HDMI:Linked to TV-off" are set to "On"
(page 21).
GB
25

Advertisement

Table of Contents
loading

Table of Contents