Honeywell HPA090 Series Manual page 3

• The Turbo setting will operate the air purifier at the highest speed. This setting will maximize the unit's ability
to help reduce odors and will help clean the air quickly if you have a specific air quality issue that needs to be
addressed.
• The Allergen setting will effectively help reduce airborne allergens from the air that passes through the filter.
HPA100, 200, 300 Series Operation:
• Once the filters have been unwrapped and replaced in the unit, plug the power cord into a working
electrical outlet.
• Select the desired cleaning level by simply TAPPING the power symbol ( ) to toggle through the cleaning
levels. A blue LED light will illuminate the selected setting: Germ, General Clean or Allergen.
TAP POWER ( ) for on/off & cleaning level selection.
ALLERGEN optimizes allergen capturing performance
during allergen season.
GENERAL CLEAN for general, everyday air cleaning.
GERM optimizes germ capturing performance. Use
during cold & flu season.
TAP TURBO ( ) for power cleaning or fast odor
reduction.
• The Turbo setting operates the unit at the highest speed. This setting will maximize the unit's ability to help
reduce odors and will help clean the air quickly. To select the Turbo setting the unit must already be running at
one of the 3 cleaning settings, TAP the Turbo icon ( ). The Turbo LED will illuminate. TAPPING the Turbo icon
( ) again will return the air purifier to the previous cleaning setting. To shut OFF, tap the Power symbol ( )
until the air purifier shuts off.
Using the Timer Option (Not available on the HPA090 Series):
The Timer Option ( ) allows you to select how long the air purifier will run before it automatically shuts off. There
are three pre-set run times: 2, 4, and 8 hours. Do not use this option if you want the unit to run continuously.
• To set the unit for Automatic Shut Off, TAP the Auto-off Timer icon ( ).
• Continue to TAP to toggle through to the desired time setting.
• An LED light will illuminate to indicate the selected run time (Fig. 5).
• The unit will automatically shut off after the indicated run time.
Using the Dimmer Option (Not available on the HPA090 Series):
The Dimmer Option ( ) allows you to adjust the brightness of the LED displays on the
control panel (Fig. 6). You may wish to adjust the brightness depending on the room
where the unit is placed. The unit always turns on with the brightness on HIGH.
To adjust brightness:
• TAP the Dimmer icon ( ) once to dim the lights to LOW.
• TAP the Dimmer icon ( ) twice and it will shut the lights OFF.
(the air purifier will not shut off).
• TAPPING the Dimmer icon ( ) a third time will return the brightness to HIGH
Fig. 4 HPA100, HPA200, HPA300 Control Panel
Fig. 5 Timer Function
Fig. 6 Dimmer Function
4
ELECTRONIC FILTER CHANGE REMINDER
These air purifier models each have two electronic filter checks to remind
you when to check and replace the True-HEPA filters and the Odor Reducing
Pre-filters based on the air purifier's hours of use.
When the True HEPA filter(s) and/or the Pre-Filter need to be replaced, the
"Check Filter" or "Check Pre-filter" light will illuminate (Fig. 7).
You should periodically check these filters. Depending on operating conditions,
the True-HEPA filters should be replaced every 12 months, and the Odor Reducing
Pre-filters every 3 months, especially if there have been heavy odors and particles
in the home.
To RESET Either Electronic Filter Check:
After you have replaced the appropriate filter(s) the "Check Filter or "Check Pre-filter" light will
remain on until it is reset. With the unit powered on, press the lighted button and hold for approximately
2 seconds until the light turns off. The electronic filter check is now reset. Depending on individual usage
(environment and hours used), you may need to replace filters more or less frequently.
NOTE: If you change the pre-filter or filter before the Electronic Filter Check lights are illuminated, it is possible to
re-set the light indicators. With the unit plugged in, but NOT powered on, press and hold each button individually
for at least 5 seconds. This will illuminate the indicator light. After the light turns on, individually press and hold
the "Check Filter" or "Check Pre-filter" button until each light goes off. At this point, the filter indicator will be
re-set to it's original "clean" status.
These cleaning intervals are intended as guidelines only. Performance of any filter media is dependent upon the
concentration of contaminants going through the system. High concentrations of contaminants such as dust, pet
dander and smoking will reduce the useful performance of the filter.
NOTE: None of the filters are washable. DO NOT immerse them in water.
REPLACING THE TRUE-HEPA FILTERS
MAINTAINING YOUR STAGE 1 WASHABLE PARTICLE PRE-FILTER
Remove and dispose of used filters
A
See INSTALLATION INSTRUCTIONS on page 2 of this manual.
Please note that each model series takes a different number of HEPA filters: HPA090 and HPA100 Series use 1 HEPA
Replacement Filter, HPA200 Series use 2 HEPA R
See ACCESSORIES AND REPLACEMENT FILTERS section on page 6 of this manual to find out where to get filters. There are
stickers inside your air purifer near the filter cavity that note the Filter Type needed for your model.
REPLACING THE ODOR REDUCING PRE-FILTER
The Odor Reducing Pre-filter not only helps reduce odors, but also helps capture large airborne particles that
enter the grille. This pre-filter should be replaced every 3 months, as it will become covered with particles and
fibers that will reduce filtration performance.
See INSTALLATION INSTRUCTIONS on page 3 of this manual.
Use the specially designed Type Odor Reducing Pre-filter.
A
A
To purchase additional pre-filters, see Accessories and Replacement Filters section on page 6.
A A
R R
R R
when it is time to change
A
A
Replacement Filters , HPA300 Series use 3 HEPA R R
5
Fig. 7 Will illuminate
HEPA filters
A A
A
R R
Filters R