Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Seatec Nemo 230
- Page 1 Yacht Tenders & Pleasure Crafts USER MANUAL ® 1989...
-
Page 2: Table Of Contents
Dear valued customer, 1. Dinghies and Accessories The delivery contents contain: the dinghy, transport bag (except with RIBs), We congratulate you on the purchase of your new SEATEC watercraft! inflation pump, 2 paddles and a repair kit. 2. Assembly/Disassembly With the purchase of this vessel, you have acquired a quality product from our company, which has been produced under very strict regulations. -
Page 3: Assembly Of Dinghies With Slatted Floors (Nemo & Yachting)
NEMO & YACHTING AEROTEND 2.2 Assembly of dinghies with high-pressure inflatable floors 2.1 Assembly of dinghies with slatted floors • Unfold the deflated dinghy. • Unfold the deflated dinghy. Before inflating the dinghy, check that each of the • Check that the valves are functioning. The check valve must be closed. floor slats is in the correct position. - Page 4 DOLPHIN Lay the paddles under the floor panels, in order to raise the dinghy up to make room for mounting the side rails. Side rails • Now attach the side rails by pressing them between the buoyancy tubes and base plates. Repeat this process on the other side. •...
-
Page 5: Paddles
2.5 Paddles PRO TENDER/PRO SPORT/GT SPORT • Paddles come included with all SEATEC inflatable boats. They consist of two parts. Insert the two parts together by pressing the safety pins down first. Make sure that the safety pins are firmly engaged by sliding them together. -
Page 6: Storage
2.8 Storage 3. Safety Instructions • To retain the vessel’s luster for as long as possible, store it in a dry, airy place with no direct sunlight. Attention! Pay attention to your safety and that of your children – • When storing the dinghy, make sure that no heavy objects that could damage it Be careful in offshore winds and currents! are placed on top of it. -
Page 7: Operation With Outboard Motor
• If an air chamber suddenly losses air pressure due to damage, do not panic! • Do not exceed the carrying capacity of total persons on board. SEATEC boats are designed so that they have at least three flotation chambers. • Oars/paddles and a repair kit must always be kept on board. -
Page 8: Repairs
4. Repairs 4. Technische Daten Small tears, cuts and holes: Length Width Weight Type air chambers Hose Ø • In order to seal a small leak or hole of 1mm to 12 mm in size, cover it with a round patch with a minimum diameter of 75 mm. •... -
Page 9: Svb Spezialversand Für Yacht- & Bootszubehör 2016
SVB Yacht- und Bootszubehör GmbH Gelsenkirchener Str. 25-27 28199 Bremen www.svb.de / www.svb-marine.fr / www.svb-marine.it / www.svb24. com SVB Spezialversand für Yacht- & Bootszubehör 2016...
Need help?
Do you have a question about the Nemo 230 and is the answer not in the manual?
Questions and answers