Long Term Storage Basic Troubleshooting For First Use Initial variability Your Airbow® Framer is a precision tool. It can in some cases require initial bedding in of components such as seals. You can expect some variability in performance during initial use.
Onboard Onboard Canister Canister SIDE B Note: The Airbow® Onboard Canister is rated to a maximum working pressure of 310bar/ 4500psi. (Refer to the Airbow® Framer manual download for all cylinder compliance information www.airbowsystems.com) Nail Depth Adjustment Lever Re-cock Lever Nose Safety ADJUSTABLE &...
Isolated / particulate into your Airbow® Framer, resulting in damage to the framer Onboard and potentially making it hazardous. It will also void your Framer Warranty. Refer to www.airbowsystems.com for further information. Canister FULL Refer to www.airbowsystems.com for more information.
Hold & Press Nail Reload Lever. Load Collated Uses a wide range of 34° D Head collated nail brands Nails ONLY (as listed on the Airbow® Website). from bottom of Capacity: 66 / Smooth & Ring. magazine. 50 - 90mm length. 2.8mm – 3.3mm gauge.
TOP UP x1000 As the onboard canister pressure hits its ‘Empty’ level the Airbow® Framer will fire a ‘soft shot’ that leaves x1000 the nail sticking out approx. 15mm. This indicates low pressure and time to top up the Airbow® Framer.
Page 7
REMOVE JAMMED NAIL Nails will fall naturally using Release Nail Reload Lever, it will Remove the jammed nail. gravity when Airbow® Framer rise to the top and click into place. It’s best to use long nose pliers is held upright.
Page 8
(online Airbow® Framer at www.airbowsystems.com). is to be transported Firing Chamber via air travel Note: It is safe for the Airbow® Framer’s onboard canister to remain There is a Onboard under pressure during normal daily suspected issue...
Page 9
Refer to the Airbow® website for more information.
Need help?
Do you have a question about the FRAMER and is the answer not in the manual?
Questions and answers