Advertisement

Quick Links

Table of Contents

Technical Information-----------------------------------1
Warning Statement--------------------------------------2
Read Before Riding-------------------------------------3
List of Parts-----------------------------------------------4
Front Bar---------------------------------------------------6
Tool Kits In The Tool Bag------------------------------7
Assembling The LIBERT-é----------------------------8
Charging The Batteries-------------------------------17
Riding The LIBERT-é----------------------------------18
Maintenance---------------------------------------------20
Wiring Diagram-----------------------------------------21
Trouble Shooting Guide------------------------------23
Warranty-------------------------------------------------25

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Libert-e and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RMB EV Libert-e

  • Page 1: Table Of Contents

    Table of Contents Technical Information-----------------------------------1 Warning Statement--------------------------------------2 Read Before Riding-------------------------------------3 List of Parts-----------------------------------------------4 Front Bar---------------------------------------------------6 Tool Kits In The Tool Bag------------------------------7 Assembling The LIBERT-é----------------------------8 Charging The Batteries-------------------------------17 Riding The LIBERT-é----------------------------------18 Maintenance---------------------------------------------20 Wiring Diagram-----------------------------------------21 Trouble Shooting Guide------------------------------23 Warranty-------------------------------------------------25...
  • Page 2: Technical Information

    LIBERT-é LIBERT-é Model No. LIBERT-é 31L x 28W x 23H inch Product size (78 L x 71 W x 58 H cm) Type of motor DC Brush Motor Motor power 36V 350W Battery type Li Battery Battery capacity 36V 10Ah Charger 110V-240V, UL approved Charging time...
  • Page 3: Read Before Riding

    LIBERT-é LIBERT-é WARNING THE LIBERT-É TRICYCLE IS NOT A TOY AND SHOULD NOT BE OPERATED BY ANYONE UNDER 12 YEARS OLD. Safety Instructions: (Please take note of the following before each ride)  The maximum weight capacity is 286 lbs. ...
  • Page 4: List Of Parts

    LIBERT-é LIBERT-é Left brake lever Instrument Throttle Right brake lever Seat Battery Controller Basket 1 Left brake lever Motor 2 Lock mechanism switch Rear wheel 3 Horn switch Tensioner Rear fender compartment 4 Instrument Chain 5 Right brake lever Chain cover 6 Throttle Crank sprocket Front wheel...
  • Page 5: Tool Kits In The Tool Bag

    é é LIBERT-é LIBERT-é 1. Unpack the LIBERT-é carefully so that you do not misplace any of the parts. 2. Take out the fork. Put the ball rack into the riser of front fork. NOTE: The ball is up. Screwdriver Allen wrench (2.5mm)...
  • Page 6 Twist the bolts, do not hammer them through as this can damage the threads. Tighten these three bolts with the nuts provided. 5. Place the Libert-e on a flat surface, and keep...
  • Page 7 é é é LIBERT-é LIBERT-é wheel’s installation. Place Libert-e on all three wheels. 8. Install the chain. It is recommended to wear 7. Take out the front wheel. Put butterfly brake gloves for protection. Properly align chain on disc (A) into butterfly brake base (B). Put the derailer (A).
  • Page 8 Install pedals according to “L” then tighen the bolt with the provided nuts. and “R” mark. Drive the Libert-e, slowly and test brake function. If the brake is too tight, loosen the bolt and loosen the brake cable a little, then tighten the bolt and retest.
  • Page 9 é é é é LIBERT-é LIBERT-é 11. Install the front brake by following the rear brake cable instructions. 13. Install the seat. Adjust the seat post to the desired height. Tighten the lock bolts with the nuts provided. 12. Install the basket with the four nuts and bolts provided.
  • Page 10: Charging The Batteries

    é é LIBERT-é LIBERT-é Before you ride the LIBERT-é for the first time ● you must charge the batteries for 4-6 hours or until the charger light turns green using only the supplied charger. To charge the batteries, plug the charger into ●...
  • Page 11: Riding The Libert

    é é é é LIBERT-é LIBERT-é hand will control the throttle and other brake. As Once you have completed the initial charge you ● you turn the throttle towards yourself, the speed are ready to ride. Remember, this is not a toy. will increase.
  • Page 12: Maintenance

    LIBERT-é LIBERT-é Battery: (for professional use only) The LIBERT-é unit is powered by 36 volt, rechargeable batteries housed in a single compartment. Other than recharging, these batteries need no maintenance. To prolong battery life, recharge the battery after each use. In addition, plugging your charger into a wall timer with...
  • Page 13: Wiring Diagram

    LIBERT-é LIBERT-é Problem Cause Solution The power light 1. Battery is 1. Recharge your on the discharged. LIBERT-é unit. instrument 2. Loose 2. Remove the does not connection screws that hold the illuminate when inside LIBERT-é. battery compartment the LIBERT-é is 3.
  • Page 14: Trouble Shooting Guide

    Call Customer pressure. Service to order a products were not specifically designed. new battery. 3. air tires up to RMB EV warrants the LIBERT-é unit for six (6) correct pressure. months according following terms. Batteries and tires are warranted for three (3) months.
  • Page 15: Warranty

    (30) days from the otherwise are disclaimed in their entirety after the date of purchase for any RMB EV product that is expiration of the appropriate thirty day warranty used...
  • Page 16 DO NOT RETURN YOUR PRODUCT TO ANY WHAT RMB EV WILL DO: ADDRESS. RMB EV will, at its sole option, either repair, Please call, email, or write for the location of the replace or refund the purchase price of any unit RMB EV authorized service center nearest you that does not conform to this limited warranty.

Table of Contents