HBC Titan User Manual

Titan Remote–Luminet
1
3
4
7
8
9
12
13
16
17
19
20
23
25
26
10 HBC - Video Service Remotes and Codes
SM
Video Service Only
2
5
6
10
11
14
15
18
21
24
29
28
27
1. SETUP - Use SETUP for all programming sequences.
2. MASTER POWER - Press POWER once to turn on or off a home theater
device.
3. AUX, DVD, AUD, TV, STB - Press AUX, DVD, AUD, TV, or STB once to
select a home entertainment device to control. Each key has a red LED
that blinks each time a key is pressed to indicate the current operating
mode.
4. SKIP BACK - Press SKIP BACK to instantly replay the last 7 seconds of
the program you are watching.
5. LIST - Press LIST once to display a list of recorded programming on your
DVR.
6. LIVE - Press LIVE to return to watching live TV.
7. CONTROL PLAYBACK - Use these keys to control playback of video or
audio files relating to DVR, DVD, VCR, or CD devices.
8. GUIDE - Use GUIDE to display the program guide available from your
service provider.
9. MENU - Use MENU to display the options menu of the home theater
device you are controlling.
10. INFO - Use INFO to display the current channel and program information.
11. EXIT - Use EXIT to directly exit menus, guides, and applications.
12. DAY - Use DAY+ (or DAY-) to move a day forward (or back) on your
program guide.
13. OK - Use the Cursor keys to move the cursor in the program guide and
menu screens and to navigate within the interactive service. Use OK to
choose options, PPV events, and to tune to programs from the program
guide.
14. PAGE - Use PAGE+ (or PAGE-) to page up (or page down) through menu
screens and the program guide.
15. A, B, C, D - Use A, B, C, or D as shortcuts to access additional features
available on set-top box menu screens, program guide, and interactive
applications.
16. VOLUME - Use VOL+ (or VOL-) to raise (or lower) the audio volume.
17. ON DEMAND - Press ON DEMAND for direct access to On-Demand
programming and other interactive services.
18. CH - Use CH+ (or CH-) to select the next higher (or lower) channel. For
DVD players, use these keys to skip forward (or reverse) through chapters
For amplifiers/receivers, use these keys to select the next higher (or
lower) preset station.
19. MUTE - Press MUTE once to turn sound off; press again to turn sound
back on.
20. FAV - Use FAV to cycle through your favorite channels stored on your
service provider's set-top box.
21. LAST - Use LAST to return to previous channel.
22. NUMBER KEYPAD - Use the keypad numbers (1-9, and 0) to directly
tune channels (e.g., 09). For amplifiers/receivers, use the keypad
numbers to select inputs 1 through 10.
23. INPUT - In CBL mode, press INPUT to view other video sources (A or B)
instead of cable. In all other modes, use INPUT to select an input source
for that device.
24. ASPECT - Press ASPECT once to change the aspect ratio (4:3 or 16:9)
on your STB or TV.
25. F1, F2 - These are macro keys that can be customized by you or your
service provider.
26. ON/OFF - Use PIP ON/OFF to open or close PIP window.
27. SWAP - Use SWAP to swap the primary viewing channel with the PIP
channel. For a DVR/PVR, SWAP can be used to switch the active channel
tuner.
28. MOVE - Use MOVE to move the PIP window location.
29. CH - Press PIP+/PIP- to change the PIP channel.