Logitech R800 Setup Manual page 4

USING THE TIMER
1 2
4 5
1
Press the timer set button.
2
Use the slide forward and back buttons to set the time.
Holding the slide forward or back button accelerates
the speed at which numbers are displayed on the LCD.
3
Press the timer set button again to confirm
the time setting.
4
Pressing the play/pause button starts the timer.
Pressing the play/pause button again pauses the timer.
5
The silent alarm will vibrate with 5, 2, and 0 minutes left.
The timer will then start counting up.
6
Holding the timer set button for 3 seconds clears
the time setting.
3
6
3 Sec.
4
USING THE RANGE INDICATOR
1 2
1
Pressing the slide forward, slide back, launch slide show,
or black screen buttons will show the signal strength.
2
If there is no signal, the range symbol will blink.
HAVING PROBLEMS?
1
Batteries and polarity OK?
2
Power switch on?
3
Receiver plugged in?
4
Range OK (up to 30 meters/100 feet)?
5
Try restarting your computer.
English