Advertisement
Quick Links
Motor: 12-Volt DC
Max Power: 14 amps
Maximum working pressure: 150psi.
Maximum recommended continuous operating time:
20 minutes.
Owner's Manual
Recommended on\off cycle time: 20 minutes on 30 minutes
off.
CAUTION:
HV-40A2
The compressor is designed to operate with a 12-volt
electrical system. After 20 minutes of continuous operation,
allow the unit to cool before restarting. Damage can occur
HI VOLUME PORTABLE
from continued overuse.
AIR COMPRESSOR
The unit will become hot during use. Please use caution
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING
when touching the unit, in order to avoid burns. Pay extra
IF YOU HAVE ANY QUESTIONS ABOUT OPERATING THE
attention when removing the quick-connect hose fitting as
COMPRESSOR,
it can become very hot during operation. Only hold the unit
BEFORE OPERATING THE UNIT, PLEASE CONTACT US AT:
by the carry handle.
DV INNOVATIONS
Only inflate tires to the manufacturer's recommended
CUSTOMER SERVICE
401 East Las Olas Blvd.
pressure.
Do not over inflate, as tire failure or serious
Fort Lauderdale Florida 33301
injury could occur.
Customerservice@qindustries.net
Always use safety glasses and work gloves.
Keep the Super Flow® unit out of reach of children. Clean
with a damp cloth only. Do not use chemicals or soap.
Do not use the unit for pumping, compressing or
transferring any gas or liquid other than air. The unit is not
designed for use as a source of breathable air.
SPECIFICATIONS
There are no user serviceable parts inside the unit. Do not
disassemble.
Advertisement
Related Manuals for SuperFlow HV-40A2
Summary of Contents for SuperFlow HV-40A2
- Page 1 Owner’s Manual Recommended on\off cycle time: 20 minutes on 30 minutes off. CAUTION: HV-40A2 The compressor is designed to operate with a 12-volt electrical system. After 20 minutes of continuous operation, allow the unit to cool before restarting. Damage can occur HI VOLUME PORTABLE from continued overuse.
- Page 2 Performance: Remove the inflator from the valve stem. Some air High altitude and certain air temperatures can negatively will escape from the brass inflator during removal of affect the unit’s performance. the hose. This is normal. We recommend that you confirm that the proper pressure has been reached Extra Caution: with a second gauge.
Need help?
Do you have a question about the HV-40A2 and is the answer not in the manual?
Questions and answers