Lapp Group EPIC CIRCON LS1/M23 Instruction Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

EPIC

CIRCON Crimp tool

11148000

Instruction manual

for EPIC

CIRCON LS1/M23

Table of Contents

Need help?

Do you have a question about the EPIC CIRCON LS1/M23 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lapp Group EPIC CIRCON LS1/M23

Page 1 ® EPIC CIRCON Crimp tool 11148000 Instruction manual ® for EPIC CIRCON LS1/M23...
Page 2 Important details for the right use of the ® EPIC CIRCON Crimp tool Using the instruction sheet: ® Keep the instruction sheet constantly with the EPIC CIRCON Crimp tool. Each person entrusted ® with the job of operating the EPIC CIRCON Crimp tool must be familiar with the operating manual and strictly observe the instructions therein.
Page 3 Scope of delivery ® The EPIC CIRCON Crimp tool is delivered with a plug gauge Ø2, a hex wrench (2.5) and the instruction manual in a plastic case. Not included in the scope of delivery ® EPIC CIRCON locator with additional locator Material-No.: 11148300 Locator Set screw and adjusting spindle with 12 steps...
Page 4 ® EPIC CIRCON Crimp tool, locator and additional locator Plug gauge Ø2 Locator 11148300 Hex wrench Additional locator ® EPIC CIRCON Crimp tool Installation of the locator Put the locator on and spin until it snaps in. Tighten it up a little by using the enclosed hex-wrench.
Page 5 Installation of the additional locator (use only in locator position 3) Place in the additional locator, straighten it and fix it by spinning. Orientation of the additional locator Control of the crimp mass: ® The EPIC CIRCON Crimp tool is preset, though a control of the crimp mass should be carried out from time to time.
Page 6 ® ® included in EPIC CIRCON connector included in EPIC CIRCON connector Contact Contact Mat.-No.: Name Mat.-No.: Name 19520027 EPIC KIT LS1 A1+D6 K 3+PE+4 (5) 19520026 EPIC KIT LS1 A1+D6 5+PE (5) 74033000 44420058 EPIC LS1 A3 5+PE K (5) 19520027 EPIC KIT LS1 A1+D6 K 3+PE+4 (5) 76004000...
Page 7 Contact Settings Type Mat-No.: mm² Hand wheel Locator 0.14 0.80 LS 1 74033000 0.34 0.90 74033001 0.50 1.15 1 mm male 0.75 1.15 1.00 1.20 0.50 1.25 74033100 0.75 1.25 74033101 1.00 1.30 1.50 1.50 2 mm male 2.50 1.60 44420103 4.00 1.55...
Page 8 U.I. Lapp GmbH D-70565 Stuttgart/Germany www.lappgroup.com A company of the Lapp Group...