Sony HK-PSU01 Installation Manual page 11

n
The maximum depth of an adaptor is 750 mm.
The minimum depth of an adaptor is 595 mm.
3. Firmly lay the right and left adaptors in the rack with
the specified six screws.
(Following figure is case of left side.)
RMM-10
1U
4. Fasten the length adjustment screws which are
loosened in step 2.
5. Remove the front panel. (Refer to Section 1-4.)
6. Align the crook of the each rack bracket on the side
panels of the unit with the rail, then slide the unit
backward.
n
Each rack bracket covers the rails as shown in the
figure below.
Rack bracket
Rail
PFV-SP3100
Front
31.75
B 4x10
Rear
B 4x10
31.75
Rack bracket
Rail
7. Fix the unit to the rack with the specified screws.
B 5x12
8. Reinstall the front panel.
1-6. Rack Mounting
B 5x12
1-7 (E)