Important Safeguards • Do not let the cord hang over the edge of a table or counter, or allow it to touch hot surfaces. Allow unit to cool before wrapping To prevent electrical shock, personal cord around base for storage. injury or property damage, read •...
Page 3
• The enclosure of the toaster, including the immediate surroundings of the bread slots, may become very hot during toasting. Do not attempt to touch these areas during, or within 10 minutes after the toasting process. This could result in physical injury. When in doubt, disconnect the appliance from the mains outlet and allow it to cool for at least 10 minutes.
Page 4
Features of the Toaster Toasting Slots High Lift / Bread Release Lever Defrost Button Cancel/Stop Button Removable Browning Controller Crumb Tray (On Back Of Unit – Not Shown) Reheat Button...
Before Using For The First Setting The Browning Time Control Ensure the above safety precautions are • Rotate the Electronic Browning controller to understood. the appropriate setting depending on the type and thickness of the bread: 1-2 slightly • Carefully unpack the appliance and remove toasted, 3-5 well toasted, 6-7 very toasted.
Reheating Toasted • The toaster turns off when the desired toast colour is achieved and automatically raises Bread the toast. The toasting process can be stopped at any time by pressing the Cancel/ Stop button. Unplug the toaster immediately This function allows you to reheat toast without after use.
Maintenance And Specifications Cleaning Power Supply……………………AC 220-240V~50Hz 1. Always turn the power off, remove the Power Consumption………………….………1000W plug and allow the toaster to cool before cleaning. NOTE: As a result of continual 2. To remove any crumbs from the toaster, slide improvements, the design and out the crumb tray from the toaster, empty specifications of the product...
Need help?
Do you have a question about the BTT815 and is the answer not in the manual?
Questions and answers