Summary of Contents for lamart TOUR
- Page 2 EN PHOTOS INSTRUCTION Spinning basket Water Shield Bucket MOP HEAD Handle grip Stainless steel shaft DETAILS: Lock Bucket 1 pc Mop plate 1 pc Handle 1 set Mop head 2 pcs Plastics nut Flat mop 1 pc Mop plate...
- Page 3 POLE ASSEMBLING POLE ASSEMBLING Before using, kindly con rm the parts and assemble thight when assembling. Please note the direction of the connection as shown OPEN LOCK Bottom STEPS TO NOTE MOP HEAD ASSEMBLING Hand press Telescopic handle...
- Page 4 STEPS TO NOTE MOP HEAD ASSEMBLING Put the plastic plate directly on the plastic disk of mop head. WARNING: Please pay attention on the oor to avoid from sliping. When faced, please put your foot on the plate to step tightly. WARNING: Please stop stepping when you hear the „KA“...
- Page 5 BUCKET ASSEMBLY SPARE PARTS FOR BUCKET AS BELOW: Plastic block Water shiled Spinning basket Bucket ASSEMBLY AS FLOW STEPS: THE WAY TO WASH THE MOP HEAD 1. Fill the water to the bucket, not exceed the max water level. 2. Put the mop plate on the axis of spinning basket and push down until hear Click sound.
- Page 6 THE WAY TO WASH THE MOP HEAD 1. Put the mop plate on the axis of spinning basket and push down until hear Click sound. 2. Pull up the mop sticker with the spinning basket to the upper position of the bucket. 3.