Firmware Upgrade Guide NOTICE This guide is published and copyrighted by Blue Sky Network. All information and specifications in this document are subject to change without notice. Nothing in this document is intended to create additional or separate warranties or guarantees.
HawkEye 100A Firmware Upgrade Guide IMPORTANT INFORMATION Please refer to the User/Installation guides for details regarding schematics and installation. Also, refer to the user guides for instructions on how to operate the equipment. This guide should only be used as a reference for the firmware upgrade process.
HawkEye 100A Firmware Upgrade Guide FIRMWARE UPGRADE This document illustrates the necessary steps to perform a firmware update on the Blue Sky Network HawkEye 100A head unit. PREREQUISITES Make sure you have the following items available before you begin: 1. HE100A Product you wish to upgrade.
HawkEye 100A Firmware Upgrade Guide LOAD NEW FIRMWARE: 1. Navigate to the “Settings” and scroll down to “Update Firmware” 2. Under “Product” select HE100A. 3. Under “Version” select the latest version unless you have a specific need to load an older version.
1. Pair the HE100A to the smartphone via Bluetooth. 2. Open the HawkEye Link App. 3. Connect to the Hawkeye 100A device. 4. Within a few seconds, the firmware version should be updated to the expected version: (Note that the version shown in this picture may not reflect the latest firmware version. Please check on Blue Sky Network’s...
Please do not hesitate to contact us via email or on the telephone number listed below. Thank you for choosing Blue Sky Network. Blue Sky Network, 5333 Mission Center Road., Suite 220, San Diego, CA 92108 Phone: +1 858-551-3894 | Fax: +1 858-225-0794 support@blueskynetwork.com...
Need help?
Do you have a question about the HawkEye 100A and is the answer not in the manual?
Questions and answers