General Safety Precautions 1. Thank you for your purchase of this appliance. Read all instructions carefully. Keep this User Manual for future reference. 2. Always unplug appliance from the power supply before cleaning or when not in use. 3. Always attach the power cord to the appliance BEFORE you plug into the power supply.
Page 3
Induction Cooker Safety Regulation 1. Use the supplementary pan provided or pans with diameter range from 12 to 18 cm. 2. It is not recommended to use pans with a diameter larger than 26cm because it overshadows the cook top size of the induction cooker.
18. If the power cord is damaged, have it replaced by the after-sales service agent or similarly qualified personnel to ensure proper installation. Specifications Model No. CIC-SP583G Voltage / Frequency 220-240V~, 50Hz Power 1900W...
Parts Identification Cooking Zone Control Panel Operating Instructions Power ON: Connect the power plug into the mains power supply and switch it ON. The buzzer will sound once and all the indicators will light up for 5 seconds and then go off. The ON/OFF indicator will blink to indicate the unit is on Standby mode.
Timer mode: The Timer key will work for stir fry and steam boat function only. The timer can be set after function selection. You can press “timer” key and use “+” or “-“ to increase or decrease auto off time at 10min, 30min and 60min. Power off: Turn the induction cooker off by pressing the ON/OFF button again.
Page 7
Soup: Press the “SOUP” key to start the induction cooker. The soup light will illuminate. The induction cooker will initially cook at the third heating level (1000W) then it will drop to the first heating level (100W). This action will repeat continuously in every 3 sec until the system setting time ends.
Cookware temperature protection: If the temperature at the bottom of the cookware is too high, the induction cooker will switch itself OFF and the first (100W) and fifth LED (1900W) indicator light will flash. Troubleshooting Guide Problems Possible Remedial Causes Actions ...
Page 9
Air cooling Check that the air system inlet and air outlet are obstructed. not being obstructed by objects. Ambient Reduce the ambient temperature is temperature. The air inlet too high (the cooling system temperature must be is unable to lower than 40°C.
Fan is never active Coil overheated. Switch off induction After a relatively long permanent Cooking zone cooker. Remove pan operating time, too hot. and wait until the Empty pan. the heating heating zone has Pan with switches off and cooled off.
Page 11
For any other maintenance and servicing work not described here, ensure they are performed only by an authorized service personnel. Always keep the cook top surface clean of food and other liquids by using a soft damp cloth. Allow to dry before storage. Regular cleaning, care and servicing of your induction cooker will ensure its performance at all times.
Need help?
Do you have a question about the CIC-SP583G and is the answer not in the manual?
Questions and answers