Toshiba LEV112320W827TE Technical Information page 18

(4)Ratings
BJB part no.
28.301.1001
28.301.1002
(5)Applicable wires
Single wire
Bonded wire
Stranded wire
Strip line
(6)注意事項
a) 3 pieces of M3 screw are attached with the socket. Please do not use any other screw, other
than the attached M3 screw.
b) Tighten the screw till the screw head reaches the installation side.
c) Regarding the pitch of the screws, please refer to the attached drawing.
d) Screw holes for the M3 screws shall be not sharp and shall have no burr.
e) When installing LLE, turn it 15°in clockwise direction. When removing LLE, turn it 15°in
anticlockwise direction.
f) Please follow the specification for LED chips manufacturer as well.
g) After stripping a wire, insert it straight, being careful at not hurting the wire covering.
h) Part selection and fixture design shall be implemented and the final product quality shall be
managed in charge of your company.
Rated voltage Rated current
120VAC
250VAC
:0.8 mm - 1.0 mm in diameter
:0.5 mm - 0.75 mm
2 2
:0.5 mm - 0.75 mm (Solder finish)
2 2
:8-9 mm
Rated temp
2A 100℃
100℃
2A