Advertisement
LOXONE 12 Channel Amplifier
Item no.: 200110
Thank you for purchasing the Loxone Twelve Channel Amplifier. The versatility of the Amplifier makes it the perfect
choice for almost every type of custom multi-room audio system. Its tabletop or rack- mountable design allows it to be
integrated easily into high-end whole house audio systems.
FEATURES
:
12 channels (6 stereo zones) in one convenient
●
enclosure
Stable Class AB design delivers superior
●
audiophile sound quality and performance
Independent and bus inputs provides
●
unparalleled flexibility
Bridgeable channel outputs provide additional
●
power when needed
Independent channel gain controls allow the
●
output of each speaker to be perfectly matched
Switchable 115/230V input voltage
●
INSTALLATION
:
Loxone amplifiers are designed to help deliver a great audio experience. However, where you place the amplifier can
have a large effect on the performance you receive, and the life of the unit. If you are not rack-mounting the amplifier,
posi- tion it with all feet resting on a solid level surface. Be sure that the amplifier is in a well-ventilated area and DO
NOT install the amplifier near a source of heat or in an extremely humid or wet location.
CAUTION:
All connections and switching must be done with the amplifier's power switch positioned to 'Off'. Connect
the power cord last to be sure that the amplifier is off during all of your connections and set up.
Manual, auto, or triggered on/off for integration
●
into any automated system
Multi-stage protection circuitry for reliability and
●
easy troubleshooting of audio system
Installer-friendly setup and connections
●
Can be converted easily between rack-mount
●
and tabletop configurations
Heavy-duty steel chassis with brushed aluminum
●
faceplate
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for LOXONE 200110
- Page 1 Item no.: 200110 Thank you for purchasing the Loxone Twelve Channel Amplifier. The versatility of the Amplifier makes it the perfect choice for almost every type of custom multi-room audio system. Its tabletop or rack- mountable design allows it to be integrated easily into high-end whole house audio systems.
-
Page 2: Front Panel
FRONT PANEL: 1. Master Power Switch / Indicator LED Front panel pushbutton power switch turns the amplifier on and off. When the switch is on and the indicator LED is red, the amplifier is in standby mode. The remote turn on switch (located on the rear) is either in the “trigger” or “auto” position. - Page 3 Note: Remember there is a delay of approximately 15 minutes before the amplifier goes to standby when using the “Auto” turn-on mode. 6. Channel Gain Control Each channel has its own independent level adjustment. This allows the output level of each speaker to be perfectly matched to its area.
- Page 4 11. AC Voltage Switch The unit is set at the factory for 115V U.S. operation; simply connect the included IEC power cord to your wall outlet. For 230V operation, move the voltage selector switch to the 230V position. When operating at 230V the internal fuse located in the IEC socket should also be changed.
-
Page 5: Specifications
the same circuit branch. Next, cable TV systems are notoriously the culprit, so be sure to try disconnecting all coaxial feeds that are connected to the system. If this solves the problem, install a coaxial line isolator and reconnect the system.
Need help?
Do you have a question about the 200110 and is the answer not in the manual?
Questions and answers