Summary of Contents for easyonHold ProStream LT
- Page 1 EOH ProStream LT I N S TA L L AT I O N A N D F E AT U R E S The ProStream LT delivers your custom streaming content 24/7. https://easyonhold.com/contact/...
- Page 2 To install: For wired connection: Connect ethernet cable between device and internet service that allows Port 80 traffic. Plug in the power connector. Connect audio cable to phone system or overhead speaker amplifier. Adjust volume using buttons on the device and/or your amplifier (if applicable). For wireless connection: obtain a custom configuration file from Easy On Hold support, containing SSID and PASSWORD.
-
Page 3: Port Configuration
Features Failover If a ProStream LT device cannot re-connect to the internet within a time period of about 4 minutes, audio files (up to 300 MB) that have been loaded into an onboard memory on the device will begin to play continuously. When the device is able to reconnect to the internet, streaming immediately resumes. - Page 4 ProStream LT Ports E T H E R N E T V O L U M E Ethernet cable port The player produces line-level for wired internet audio from this stereo 3.5mm jack. connection. U S B Used for programming the device prior to shipping.
- Page 5 S TAT U S L I G H T STEADY ON/OFF BLINK: Playing stream normally. DOUBLE FLASH BLINK: Playing failover audio files. R E S E T The reset button is used to restart the device. This is only used during programming.
-
Page 6: Specifications
Weight: 2.0 LB with packaging Bandwidth Consumption @ 128k: 0.025 GB/hr. Bandwidth Consumption @ 192k: 0.13 GB/hr. In The Box ProStream LT Device DC Power Adapter RCA to 3.5mm Cable - 10 ft. Ethernet Cable - 7 ft. 3.5mm Mono-to-RCA Audio Connector... - Page 7 SUPPORT q+1-888-798-4653 E support@easyonhold.com copyright Easy On Hold ® ©...
- Page 8 E support@easyonhold.com https://easyonhold.com...