Summary of Contents for Restylane Vital
- Page 1 Handling guide for the restylane injector ® Handling guide for tHe restylane ® injector...
- Page 2 Handling guide for tHe restylane Handling guide for tHe restylane ® ® injector injector...
- Page 3 Vital light. this unique injection device enables a controlled dosage of 10 μl of gel per injection site. as the restylane injector is preloaded with 2 ml of restylane Vital or restylane Vital light, one injector can deliver approximately 200 doses.
- Page 4 Hold the restylane injector at the product ® reservoir and unscrew the protective cap. b. attach the needle firmly to the restylane injector, by pushing and screwing the needle hub into the luer-lock connection until stop. 2. Wind the Restylane Injector...
- Page 5 3. Prime the Restylane Injector remove the needle cap, hold the restylane injector ® upright and press the dose activator until you hear a click. repeat this procedure (normally 15-25 times) until a droplet is visible on tip of needle.
- Page 6 Make sure the spring is loaded by winding the knob until stop. check if the needle is clogged and replace it if needed. if the restylane injector has run out of product - use a new restylane injector or finish the treatment session.
- Page 7 Also note that the Restylane Injector contains a powerful spring that could cause personal injury if the Restylane Injector is opened. Can I use the Restylane Injector if it has been dropped on a hard surface? dropping the restylane injector could destroy it or affect its performance.
- Page 8 ® of 10 million treatments worldwide. www.restylane.com Handling guide for tHe restylane injector ® Q-Med aB • seminariegatan 21 • se-752 28 uppsala • sweden Phone: +46(0)18-474 90 00 • fax: +46(0)18-474 90 01 • www.q-med.com • info@q-med.com...
Need help?
Do you have a question about the Vital and is the answer not in the manual?
Questions and answers