Table of Contents
Advertisement
Washer Dryer
OWNER'S MANUAL
Read This Manual
Use all instructions and explanations of
the installation before use. Follow the
instructions carefully. Keep the operation
instructions handy for later use. If the
application is sold or passed on then ensure
that the new owner always receives those
operation instructions.
CAUTION: HOT SURFACE !
CAUTION: RISK OF FIRE !
Advertisement
Table of Contents
Related Manuals for Prima PRLD375
Summary of Contents for Prima PRLD375
- Page 1 Washer Dryer OWNER’S MANUAL Read This Manual Use all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the operation instructions handy for later use. If the application is sold or passed on then ensure that the new owner always receives those operation instructions.
-
Page 2: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS Safety Instructions ..........INSTALLATION Product Description ..........Installation ............OPERATIONS Quick Start ............. Before Each Washing ..........Detergent Dispenser ..........Control Panel ............Option..............Other Functions ............Programmes............Washing Programmes Table ........MAINTENANCES Cleaning And Care ..........Trouble Shooting ............ -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Safety Instructions For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. Explanation of the symbols: ！ Warning! This combination of symbol and signal word indicates a potentially dangerous situation which may result in... - Page 4 SAFETY INSTRUCTIONS • Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals. • To ensure your safety, power plug must be inserted into an earthed three-pole socket.
- Page 5 SAFETY INSTRUCTIONS • Glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas. • Remove all packages and transport bolts before using the appliance.
-
Page 6: Installation
SAFETY INSTRUCTIONS hot water and cold water supply. • Plug must be accessible after installation. • The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washer dryer. •... - Page 7 SAFETY INSTRUCTIONS • Before washing the clothes at first time, the product shall be operated in one round of the whole procedures without the clothes inside. • Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as detergents. Please only select the detergents suitable for machine washing, especially for drum.
- Page 8 SAFETY INSTRUCTIONS • Items such as foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine. • Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
-
Page 9: Product Description
INSTALLATION Product Description Detergent Drawer Control Panel Power Plug Door Drain hose Note! • The product line chart is for reference only, please refer to real product as standard. Accessories Transport Supply hose Supply hose hot Drain hose support Owner’s manual hole plug cold water... -
Page 10: Installation
INSTALLATION Installation Installation area ！ Warning! • Stability is important to prevent the product from wandering! • Make sure that the product should not stand on the power cord. W> 20mm Before installing the machine, the location characterized follows shall be selected: 1.Rigid, dry, and level surface 2.Avoid direct sunlight 3.Sufficient ventilation... - Page 11 INSTALLATION Levelling the washer dryer ！ Warning! • The lock nuts on all four feet must be screwed tightly against the housing. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts. 2.Loosen the lock nut turn the feet until it closely contacts with the floor.
- Page 12 INSTALLATION Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise. water supply hose water Inlet valve Drain Hose ！ ！ Warning! Warning! • Do not kink or protract the drain hose. •...
-
Page 13: Operations
OPERATIONS Quick Start Caution! • Before washing, please make sure it’s installed properly. • Before washing at first time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows. 1. Before Washing Main wash Softener... -
Page 14: Before Each Washing
OPERATIONS Before Each Washing • The working condition of the washer should be(0-40) °C .If used under 0 °C ,the inlet valve and draining system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use. -
Page 15: Detergent Dispenser
Dam-board Liquid detergent Powder detergent Pull out the dispenser Caution! • Detergent only need to be added in "case I “after selecting pre-washing for machines with this function. Model:PRLD375 Programme Programme Dry Only Cotton Spin Only Cotton Eco 1 Hour W/D... - Page 16 OPERATIONS Note! • As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent inlet of detergent box from being blocked and overflowing while filling water. •...
-
Page 17: Control Panel
OPERATIONS Control Panel Model:MFG80-DU1410B/C20E-EU(A) 1 1 1 Note! • The chart is for reference only, Please refer to real product as standard. On/Off Start/Pause Product is switched on or off. Press the button to start or pause the washing cycle. Programmes Option Available according to the laundry type. -
Page 18: Option
If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and when the power is restarted, press the button the program will continues. On/Off Model:PRLD375 Programme Option Programme Option... -
Page 19: Other Functions
Cut off the power supply , the kid’s protection is to be released. • The child lock will remain effective when the power is resumed for some models. Speed Speed Press the button to change the spin speed. Model:PRLD375 Programme Programme Default Speed(rpm) Default Speed(rpm) - Page 20 OPERATIONS Temp. ℃, Press the button to regulate the temperature(Cold,20 30℃, 40℃,60℃,90℃) Mute the buzzer Temp. Press the [Temp.]button for 3sec.the buzzer On/Off Start/Pause is mute. To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.
-
Page 21: Programmes
OPERATIONS Programmes Programmes are available according to thelaundry type. Programmes Cotton Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Cotton Eco To increase the washing effects, washing time is increased. Synthetic Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles. -
Page 22: Washing Programmes Table
OPERATIONS Washing Programmes Table Model:PRLD375 Washing/Drying Load Programme Temp. °C Default Time (H) (kg) Default 1400 Cotton ECO 1:07 Sport Wear 1:19 Quick Cold 0:15 Delicate 1:00 Wool 1:07 Colors Cold 1:00 Jeans 1:48 Spin Only 0:12 Rinse&Spin 0:31 Baby Care... -
Page 23: Maintenances
MAINTENANCES Cleaning And Care ！ Warning! • Before your maintenance starts, please unplug the machine and close the tap. Cleaning The Cabinet Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. - Page 24 MAINTENANCES Cleaning The Inlet Filter Note! • Inlet filter must be cleaned if there is less water. Washing the filter in the tap 1.Close the tap. 2.Remove the water supply hose from the tap. 3.clean the filter. 4.Reconnect the water supply hose Washing the filter in washer dryer: 1.Screw off the inlet pipe from the backside of the machine.
- Page 25 MAINTENANCES Cleaning Drain Pump Filter ！ Warning! • Be careful of the hot water! • Allow detergent solution to cool down. • Unplug the machine to avoid electrical shock before washing. • Drain pump filter can filter the yarns and small foreign matters from the washing.
-
Page 26: Trouble Shooting
MAINTENANCES Trouble Shooting The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre. Description Reason Solution Washer dryer Restart after the door is closed Door is not closed properly cannot start up Check if the clothes is stuck... -
Page 27: Technical Specifications
MAINTENANCES Technical Specifications MAX.Current Standard Water Pressure 0.05MPa~1MPa Model PRLD375 Power Supply 220-240V~,50Hz Washing Capacity 8.0kg Drying Capacity 6.0kg Dimension(W*D*H) 595*565*815 Weight 64kg Rated Power 1900W Drying Power 1300W 10 24 10 26... -
Page 28: Product Fiches
MAINTENANCES Product Fiches Model PRLD375 Washing Capacity Drying Capacity Spin Speed 1400 rpm Energy efficiency class 5.44kwh/Cycle Energy consumption of per cycle (to wash and dry a full capacity wash load at 60°C) Water consumption of per cycle(Total) 124 L/cycle... - Page 29 MAINTENANCES Note! • Programme setting for testing in accordance with applicable standard EN 50229:2007+Commission Directive 96/60/EC. • When using the test programmes, wash the specified load using the maximum spin speed. • The actual parameters will depend on how the applicance is used,and maybe different with the parameters in above mentioned table.
-
Page 30: Built-In Installation
BUILT-IN INSTALLATION Built-in installation Appendix Self-tapping Self-tapping Hinges Counter magnet Spacer Fixed position screws screws paper (ST4*12) (M5*12) Tool Screw driver Automatic driver Ruler Pencil Install Steps 600mm 580mm 825mm 152.5mm 17.5mm Overview The door is open from left to right The door is open from right to left Preparation and assembly of the door... - Page 31 BUILT-IN INSTALLATION Position Paper Make the mark on the door Position Paper Position Paper Left Open Right Open Fixed position paper on the door. 35mm Drill hole on the door...
- Page 32 Installation the hinges and spacer Installation the counter magnet Installation the door ！ Warning! • When installing the appliance into the kitchen ensure furniture ,if possible, the hoses are placed in either of the two recesses on the back of the appliance. This will help to prevent the hoses from becoming kinked or trapped.