HIRD GLASS WINLET 350TH Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

www.hird.co.uk

OPERATOR MANUAL

WINLET 350TH

Central

Southern

Northern (Head Office)

Tel: +44 (0)203 174 0658

Tel: +44 (0)1302 341659

Tel: +44 (0)1482 227333

DISCLAIMER - ALL INSTRUCTIONS ARE SUPPLIED FROM MANUFACTURER AND WHERE CORRECT AT TIME OF PRINT

Table of Contents

Need help?

Do you have a question about the WINLET 350TH and is the answer not in the manual?

Questions and answers

Summary of Contents for HIRD GLASS WINLET 350TH

Page 1 OPERATOR MANUAL WINLET 350TH Central Southern Northern (Head Office) Tel: +44 (0)203 174 0658 Tel: +44 (0)1302 341659 Tel: +44 (0)1482 227333 DISCLAIMER - ALL INSTRUCTIONS ARE SUPPLIED FROM MANUFACTURER AND WHERE CORRECT AT TIME OF PRINT...
Page 2 Northern Tel: +44 (0)1482 227333 (Head Office) Central Tel: +44 (0)1302 341659 Glazing Robots Southern Tel: +44 (0)203 174 0658 www.hird.co.uk Winlet 350TH Machine Model: Site Name: Date Week Commencing: Fleet No: Address: Inspected by: Daily Pre-use Checks COMMENTS Are all operators manuals present and readable...
Page 3: Table Of Contents
Operation and safety Safety test (before starting) Use of Winlet Lifting and handling Handling of load (use of hydraulic cylinders) Service/maintenance Storage and lifting of Winlet 350TH Servicing Troubleshooting Charging the batteries Service/maintenance Specifications CE – EU declaration of conformity...
Page 4: Description
7 Control Panel Description Winlet 350TH is a battery-operated window robot with a lifting capacity of 350 kg designed to be used on the forks of a building machine. The robot is made by GMV A/S to facilitate conveying and mounting of window elements or similar sealed items.
Page 5: Safety Instructions
• To securely fasten Winlet 350TH to the forks, the forks must be all the way in the Winlet 350TH and the bolts (supplied with Winlet 350TH) must be securely fastened behind the forks and locked with Locking Pin.
Page 6: Operation And Safety
2 Vacuum gauges Winlet 350TH is equipped with a power switch which has a removable key. The power switch also functions as emergency stop. As soon as the key is turned in the “OFF” position the power supply to the machine’s functions turns off.
Page 7 Leak test process Place all suction cups on a level, dry and airtight surface (e.g. a window). Start the Winlet 350TH at the on/off button and wait until the red lamps go out on the operating panel. Now activate the vacuum by engaging both buttons on the operating panel at the same time.
Page 8: Lifting And Handling
Using the vacuum function: Start the Winlet 350TH with the on/off button. Press both buttons for the vacuum function on the operating panel and wait a moment until both red LED lamps go out. During this time, a vacuum of at least 60% has been created in the vacuum system.
Page 9: Handling Of Load (Use Of Hydraulic Cylinders
Handling of load (use of hydraulic cylinders) The Winlet 350TH is equipped with an electro-hydraulic system which makes it possible to move the lifting arm of the machine in 4 different directions: 1. Main cylinder, which positions the item roughly in the vertical position.
Page 10: Storage And Lifting Of Winlet 350Th
The Winlet 350TH is equipped with load monitoring whereby a red lamp flashes on the operating panel when approaching the max. capacity in a given position. At this warning, all cylinders must be retracted. If you continue running the cylinders "outwards", the warning lamp will remain on constantly and there is a risk of the machine overturning.
Page 11: Charging The Batteries
Service/maintenance General The Winlet 350TH is designed to cope with the demands and the environment extant at a construction site, but its service life and safety can be reduced considerably if the stated service/maintenance items are not complied with.
Page 12 Lubrication The Winlet 350TH is primarily constructed using maintenance-free bearings in all moving parts. All these parts must be kept free of dirt, but lubrication is not required. This means the machine should only be lubricated with grease at the bearing?? joints as required: Bearing liner –...
Page 13: Specifications
Specifications: Max. load 350 kg Width 840 mm External length 1.850 mm Own weight 400 kg Min. extension 290 mm (front bumper to suction cup) Min. extension 790 mm (front bumper to suction cup) Max. height of centre lifting yoke 2.700 mm Lateral displacement 100 mm...
Page 14: Ce – Eu Declaration Of Conformity
CE – EU Declaration of conformity Manufacturer Company name: GMV A/S Address: Industriparken 1 Post code: DK-7182 Bredsten Tel.: +45 7573 8247 Responsible for the technical dossier Authorized to prepare the technical dossier: Jesper Faurskov GMV A/S Industriparken 1 DK-7182 Bredsten hereby declares that Machine Designation: Winlet...