Advertisement
installation
WARNING
To avoid the possibility of the fixture plug getting wet, position
aquarium stand and tank to one side of a wall-mounted receptacle
to prevent water from dripping onto the receptacle or plug. A "drip
loop," shown in the figure below, should be arranged by the user
for each cord connecting the tank to the receptacle. The "drip loop"
is that part of the cord below the level of the receptacle, or the
connector if an extension cord is used, to prevent water traveling
along the cord and coming in contact with the receptacle. If the plug
or receptacle does get wet, DON'T unplug the cord. Disconnect
the fuse or circuit breaker that supplies power to the appliance.
Then, unplug and examine for presence of water in the receptacle.
Installation
1. Before removing your AquaPod aquarium from the box, please note any exterior shipping damage to
the box. It is strongly recommended to keep the box and packaging material in the unlikely event there
is shipping damage or service is required. If you notice any damage (broken glass, cracked lid, broken
lamps, etc...) please stop and contact your dealer immediately. Inspect glass closely for any cracks.
2. Ensure tank is placed on a flat, level surface. The stand must be able to hold a maximum weight of
250 lbs.. Ensure location that has plenty of ventilation. If placing next to a wall, allow 3"-4" of space
between wall and back of tank.
3. To install submersible pump, unwind power cord and slide cord thru the notch on the hinged back.
Attach the plastic return fitting at the top of the flexible line to the inlet of the flat spray nozzle. Always
ensure that an adequate water level is maintained to keep pump submersed. Running pump dry or
not submersed will void warranty.
4. Place mechanical filter sponge block into the under the overflow of the filter chamber, biomedia (if
used) and other media can be placed in back open chambers.
Sponge Filter
- Used for me-
chanical filtering
of water. Recom-
mended for all
tanks.
Filter Components
Activated Carbon - used
for chemically cleaning
contaminants in water.
cteria. Recommended
for freshwater fish and
marine fish tanks.
Ceramic Biomedia - Used
for growing bacteria. Rec-
ommended for freshwater
fish and marine fish tanks.
Bioballs - Used for
growing bacteria and
removing bubbles.
Recommended for
freshwater fish and
marine fish tanks.
WWW.CURRENT-USA.COM
Advertisement
