Advertisement
Quick Links
WARRANTY
All fiber optic transmission systems, products and accessories
manufactured by Liteway, Inc. and it's subsidiaries are fully tested
prior to shipment and are warranted against defective materials
and workmanship for a period of five full years from the date of the
original shipment. Should a problem occur, a Return Material
Authorization Number (RMA) must be obtained from Liteway Inc.
at (516) 931-2800 and the item returned to Liteway, Inc. 166
Haverford Road, Hicksville, NY 11801, USA, prepaid. Liteway Inc.
will then, at its option repair or replace the defective item.
Liteway, Inc. maximum liability under this warranty is limited to the
cost of the defective item only. No contingent liabilities of any kind
are either assumed or implied.
Any items returned to Liteway, Inc. that have been misused,
abused, damaged, modified, connected or adjusted in any way
contrary to the instructions furnished by Liteway, Inc. or repaired
by unauthorized personnel will not be covered by this warranty.
Any non-warranty repairs required will be quoted at the current
rate for such services.
!
Important Notices
CAUTION !
AVOID DIRECT EXPOSURE TO BEAM.
All -7,-8, and -9 Models use laser diodes. These solid-state laser
diodes are located in the optical ports of these units. Laser diodes
produce invisible radiation that may be harmful to human eyes.
Never look directly into the optical port of any fiber optic unit
designed to operate with single-mode optical fiber.
NOT FOR LIFE SUPPORT SYSTEMS
Liteway, Inc. does not authorize or warrant any of its products or
accessories for use in critical life support systems or applications
of any kind.
© Copyright 2017 Liteway, Inc.
110770 Rev D
OPERATING INSTRUCTIONS
®
Litelink
Noise Canceling Headset
Model ACC-1003
The ACC-1003 is a noise canceling headset with a 5 ft. cord and
3.5mm mini plug.
Technical Specifications
Speaker Impedance
Speaker Output Level
Speaker Power Input Maximum
Microphone impedance
Microphone Normal voltage
All specifications are subject to change without prior notice.
8 ohms
109 dB @ 1mW
500mW Continuous
2000 ohms nominal
1.5 VDC
Advertisement
Summary of Contents for Litelink ACC-1003
-
Page 1: Operating Instructions
Any non-warranty repairs required will be quoted at the current rate for such services. Important Notices The ACC-1003 is a noise canceling headset with a 5 ft. cord and 3.5mm mini plug. CAUTION ! AVOID DIRECT EXPOSURE TO BEAM. - Page 2 Description CAUTION: It is nearly impossible to adjust the microphone close to The ACC-1003 uses acoustic noise canceling which was developed the mouth without first removing the headset from the head. With the to allow clear radio communications, in extremely high ambient noise headset removed from the head, bend the boom very drastically, so environments.