1. Preface 1.1 Packing list Product name quantity moving head light 1 pcs Power -line 1 base User manual 1pcs 1.2 Unpacking instructions On receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are presented, and have been received in a good condition.
line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture. Before the first time to use it, Please check whether the damage in transit, if happen damages in transit, please do not use this lamp, and please asap contact distributors or manufacturers.
the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power. 3.2 Fixture linking You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or more fixtures set to a master/slave operating mode.
tilt 0-255 tilt fine 0-255 pan/tilt speed 0-255 color 0-255 gobo 0-255 gobo2 0-255 gobo2 rotate 0-255 focus 0-255 prism rotate 0-255 auto 0-255 reset > pan offset (-128) - (+127) tilt offset (-128) - (+127) offset value color wheel offset (-128)...
Page 8
4.3DMX channels 15CH channel Function description channel value dimmer 0-255 from dark to bright 0-10 no strobe strobe 11-255 from slow to fast strobe 0-255 pan fine 0-255 pan 16 bit tilt 0-255 tilt 0-255 tilt fine tilt 16 bit pan tilt speed 0-255 pan tilt speed slow...