Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Milennia MIL-AMP200BT
Summary of Contents for Milennia MIL-AMP200BT
- Page 1 MIL-AMP200BT 4 Channel Amplifier With Bluetooth Function...
-
Page 2: Connecting The Power
Amplifier be grounded to a clean, bare,metal surface of the vehicle＇ s chassis. NOTE MIL-AMP200BT GROUND WIRE SHOULD NOT BE EXTENDED MORE THAN 3 FT. ( 1 METER). USING THIS METHOD CAN CAUSE TURN ON AND TURN OFF TRANSIENTS (NOISE) - Page 3 RCA high input X-OVER Depending on the selected switch setting, the amplifier operates in Fullrange,Highpass or Lowpass mode. Aux Input This unit's bluetooth signal input always has priority right, meanins that even if an Aux cable is connected to the Aux input, the bluetooth signal is still working. To enable Aux mode, bluetooth signal has to turned off.
-
Page 4: Connecting To Bluetooth
LOW LEVEL INPUT WIRING Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality MIL-AMP200BT RCA cable for best audio performance. NOTE: Do not connect BOTH the high level and low level inputs from your receiver to your...
Need help?
Do you have a question about the MIL-AMP200BT and is the answer not in the manual?
Questions and answers
when blue tooth is connected and playing fine and then the cart gas pedal is pushed to move the cart the blue tooth disconnects. redo connection process and the same thing happens.
The Bluetooth connection on the Milennia MIL-AMP200BT could disconnect when the cart's gas pedal is pushed if the Bluetooth is wired to continuous power instead of through a switch. This setup may not allow reactivation of the pairing signal, especially if the power is momentarily interrupted when the pedal is pressed.
This answer is automatically generated