Glasdon Echelon Installation Instructions

Cycle shelter. ground fixing & end panel

Advertisement

Echelon™ Cycle Shelter
GROUND FIXING & END PANEL INSTALLATION INSTRUCTIONS
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
Please also refer to the 'Manual Handling Operations Regulations 1992' during the handling of the
product and materials used for installation. Glasdon recommends that a full Health and Safety
analysis is carried out prior to installation.

GROUND FIXING KIT CONTENTS

ITEM 1 - Self Tapping Anchor Bolt (M10 x 100mm)
ITEM 2 - Washer (M12 x 23mm)

OPTIONAL END PANEL FIXING KIT CONTENTS:

ITEM 3 - 3mm Polycarbonate End Panel
ITEM 4 - Socket Button head screw (M6 x 20mm) x 39
ITEM 5 - Spring Washer M6
ITEM 6 - Penny Washer (M6 x 25mm)
ITEM 7 - Spacer (M6 x 10 x 3mm)
DIAGRAM NOT TO SCALE
1 Panel Kit
x 1
x 39
x 39
x 39
1
2

TOOLS/EQUIPMENT REQUIRED:

x12
- 4mm Allen Key (Supplied)
x12
- Drill + 010mm masonry drill bit.
- 17mm socket + Socket wrench.
- Spiral brush + Air blower (Optional)
2 Panel Kit
x 2
x 78
x 78
x 78
x 78
3
4
5
6
7
1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Echelon and is the answer not in the manual?

Questions and answers

Summary of Contents for Glasdon Echelon

  • Page 1 IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE Please also refer to the ‘Manual Handling Operations Regulations 1992’ during the handling of the product and materials used for installation. Glasdon recommends that a full Health and Safety analysis is carried out prior to installation.
  • Page 2 INSTALLATION - GROUND FIXING INSTRUCTIONS Concrete Surface Mount 4115mm 4000mm 80mm Detail View A 200mm Minimum distance afrom Minimum 80mm any edge of the concrete. Conctrete Depth Adjustable Feet In cases of uneven ground, use the adjustable feet to level the shelter. Using the socket wrench, 25mm untighten the fixing.
  • Page 3 ASSEMBLY Optional Polycarbonate End Panels Assemble the required amount of fixings On the outside of the panel, peel back the needed for the end panels by placing items protective film around the perimeter of 5,6 and 7 over item 4. the polycarbonate panel (Item 3) to reveal the fixing holes.
  • Page 4 GLASDON cannot be held responsible for claims arising from incorrect installation, unauthorised modifications or misuse of the product. Stock No. C000/1034 - DWG No. 12B-112-13 Issue 3 - October 2018 © Copyright 06/2018 Glasdon UK Ltd reserve the right to alter specifications without prior notice. 4 of 4...

Table of Contents