Advertisement
ProRing2
The ProRing 2 is an entirely mobile source of light. The interior diameter
of 100 mm provides plenty of space for professional camera lenses.
Since the camera holder can be tilted forward and backwards, as well as
upwards and downwards, most cameras can be attached. This makes
an excellent source of light in cramped areas, for example the interior
of an automobile. Many fashion photographers also use the ProRing 2
to find new angles and capture details. The ProRing 2 provides a very
distinct, directed light, but can be complemented by a soft or a widesoft
Reflector, which increases the light source, thereby producing a softer
light with fewer sharp shadows.
Brief Instructions
• Connect the Ring Flash to the generator socket.
Mounting Reflector
• Remove the two ridged screws fixating the camera holder.
• Remove the four ridged nuts holding the outer and inner reflectors
together.
• Run the lamp cable through the outer reflector and let the reflector
slide into position.
• Reassemble the outer and inner reflectors using the ridged nuts.
• Reassemble the camera holder using the two ridged screws.
www.profoto.com
7
Advertisement
