Sony Cyber-shot DSC-HX99 Help Manual page 121

(B) Guidance bar
Note
If the entire angle of the panoramic shot is not achieved within the set time, a gray area occurs in the composite image. If this
happens, move the product faster to record the full panoramic image.
When [Wide] is selected for [Panorama: Size], the entire angle of the panoramic shot may not be achieved within the given time.
If this happens, try shooting after changing [Panorama: Size] to [Standard].
Since several images are stitched together, the stitched part may not be recorded smoothly in some cases.
When a light source such as a fluorescent light flickers, the brightness and color of a stitched image may not be consistent.
When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness and focus, the shooting
may not be successful. If this happens, change AE/AF locked angle and shoot again.
The following situations are not suited for shooting Sweep Panorama:
Moving subjects.
Subjects that are too close to the product.
Subjects with continuously similar patterns, such as the sky, beach, or a lawn.
Subjects with constant change such as waves or water falls.
Subjects with brightness widely different from its surroundings such as the sun or a light bulb.
The Sweep Panorama shooting may be interrupted in the following situations:
When the camera is panned too fast or too slow.
When the camera shakes too much.
Continuous shooting is performed during shooting Sweep Panorama and the shutter sound keeps beeping until shooting is
finished.
The following functions are not available with Sweep Panorama:
Smile Shutter
Set. Face Prty in AF
Face Prty in Mlti Mtr
Auto Obj. Framing
DRO/Auto HDR
Picture Effect
Soft Skin Effect
Center Lock-on AF
Zoom
Drive Mode
Bright Monitoring
The values of the settings for some functions are fixed with Sweep Panorama, as follows:
[ISO] is fixed to [ISO AUTO].
[Focus Area] is fixed to [Wide].
[ High ISO NR] is fixed to [Normal].
[Flash Mode] is fixed to [Flash Off].
121