BAMO IER MAXIMAT TC4 Operating Instructions Manual

Safety Precautions:
Installation, initial start-up and maintenance may only be performed by trained personnel!

 The device may only be connected to power which complies with the specifications included in the
technical data and on the serial plate!
 The device must be disconnected from all sources of power during installation and maintenance work!
 The device may only be operated under the conditions specified in these operating instructions!
Functions Description:
The MAXIMAT TC4 is a signalling device for up to 4 MAXIMAT C... series overfill inhibitors / leakage sensors with
optical and acoustic indication in accordance with approval guidelines for overfill inhibitors (ZG-ÜS). If an alarm
signal is generated by one of the overfill inhibitors or leakage sensors, this can be indicated optically and/or
acoustically by the MAXIMAT TC4.
Technical Data:
Supply power:
Power consumption:
Ambient temperature:
Protection per EN 60 529:
Inputs:
Outputs:
The function test does not replace the operating test specified in ZG-ÜS, section 6.2, which must be conducted on a regular basis at
* Note:
least once a year.
Contact rating, output relays:
Terminals:
Phone: +49 (0)621 84224-0  Fax: +49 (0)621 84224-90  www.bamo.de  info@bamo.de
SU3312a.doc 03/15
230V AC, 50 to 60Hz, alternatively 24V DC ± 20%
Approx. 6VA / approx. 6W
-20 to +60°C
IP65
4 each overfill/leakage sensor
1 external reset contact
4 floating changeover contacts, assigned to the individual sensors
1 floating changeover contact for group alarms
1 floating changeover contact for the external buzzer
250V AC / 115V DC
500VA / 3A
Max. wire cross-section of 2.5 sq. mm
BAMO IER GmbH  Pirnaer Str. 24  D-68309 Mannheim, Germany
O I
PERATING NSTRUCTIONS
MAXIMAT TC4 S
IGNALLING
D
EVICE
1