– GPUs without PCIe power connection cannot be used with the BizonBOX. 6-pin + 6-pin connections can be used at the same time. – The power connector must match the connection on the GPU. » Technical Support E-Mail: support@bizon-tech.com (С) 2009–2017 BIZON. All Rights Reserved.
Page 3
1.7. Close the case by inserting inner GPU housing back into the BizonBOX and tighten fours screws on the bottom side. 3. actiVatinG BiZon BoX in Macos/os X WarninG: Be careful with the power cables connected to the GPU – Boot your computer into Recovery Mode by holding CMD + R on your and ensure you are carefully reseating the GPU within the BizonBOX keyboard as your computer boots up (see photo N1).
Page 4
– Wait for process to be completed. Restart your computer. application here: http://bizon-tech.com/bizonboxmac.zip – After reboot run BIZON BOX Device Manager again. notE: this application is for BizonBoX only. don't use with any – Press ”step 2” button. Enter the administrator password. After few other products.
Page 5
– The white bar at the top of the left blue box represents the menu bar Windows 10. you see at the top of your display. Menu bar placement determines which display is treated as the primary display in OS X. NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us AMD: http://support.amd.com/en-us/download (С) 2009–2017 BIZON. All Rights Reserved.
Page 6
More details about Windows: The eGPU in the BizonBOX can be used on either the internal or There are some exceptions that allows you to bypass external monitor external displays. requirement and use only internal monitor: (С) 2009–2017 BIZON. All Rights Reserved.
Page 7
1. Open dsdt folder, right click on uninstall.bat and choose Run as user. Сonnect the power cord to the right thunderbolt port. Administrator. 2. Reboot your system. 13-Inch: Any port. Mac os: 15-inch: Go to System Preferences –> Energy Saver. Disable Automatic graphics card switching. (С) 2009–2017 BIZON. All Rights Reserved.
Need help?
Do you have a question about the Bizon Box 3 and is the answer not in the manual?
Questions and answers