Advertisement
Smart Motion Sensor
Using Your Product
¥ Turn on the device using the ON/OFF switch.
¥ To record a message, press the record button until a single beep is heard, record a
message, then press the record button again to stop recording and a double beep
will be heard. There are 30 seconds of audio available for recording.
¥ To play back the message the motion sensor needs to be activated. This can be
triggered by walking past within a distance of 1m in front of the sensor.
¥ The sensor has magnets inside which allows the user to fix to a magnetic surface.
¥ Key hole slots are provided for wall hanging.
Battery Precautions
¥ This product requires 3 x AAA batteries (not included).
¥ Batteries are to be inserted with the correct polarity.
¥ The supply terminals are not to be short circuited.
¥ Only batteries of equal size and type should be used.
¥ Non-rechargeable batteries are not to be recharged.
¥ Rechargeable batteries are only to be charged under adult supervision.
Replacing Batteries
¥ Remove the battery hatch cover and carefully remove the batteries and dispose of
them responsibly.
¥ Insert new batteries, ensuring the correct polarity. Replace the battery hatch firmly and
accordingly.
¥ Different types of batteries or new and used batteries are not to be mixed.
¥ Exhausted batteries are to be removed from the product.
Advertisement
