Ewig THX301 Instruction Manual

Thermo sensor

Advertisement

Thermo sensor
Model: THX301
Congratulations on your of purchasing our new long range outdoor
thermo-hygrometer senor which can cover up to 75m range in an open
area. This sensor is designed for everyday use for the home or office and
used to monitor the temperature and humidity change of outdoor sites.
B

Features

A. LED indicator
Flashes when remote unit transmits a reading.
B. Channel number
Indicates the remote sensor is set to which channel and the user can find the
corresponding reading in the same channel in the linked receiving unit.
C. Temperature/humidity display
Display the measured temperature and humidity

Description of buttons

The remote sensor has 3 function buttons inside the battery compartment
1. [CH] button
After the battery installation, the LED blinks slowly every 1.5 seconds and channel
number shows '1' to indicate it is now under channel setting mode and is set to
channel 1 by default. If the user presses no key within ten seconds, the unit will
auto-exit the channel setting.
If the user press [CH] button once during the channel setting, the channel number
Instruction Manual
A
C
D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the THX301 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ewig THX301

  • Page 1 Thermo sensor Model: THX301 Instruction Manual Congratulations on your of purchasing our new long range outdoor thermo-hygrometer senor which can cover up to 75m range in an open area. This sensor is designed for everyday use for the home or office and used to monitor the temperature and humidity change of outdoor sites.
  • Page 2 is changed to ‘2’ to indicate the unit is set to channel 2. If the user press [CH] button again, the channel number will be advanced to channel ‘3’ and so on. The maximum channel number is ‘5’ and the unit will be scrolled back to channel ‘1’...
  • Page 3 c. Do not tamper with these units’ internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage battery and distorted parts. d. Do not subject the unit to excessive exposure to direct sunlight. The remote sensor is splash proof.
  • Page 4 harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.

Table of Contents