Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Bartscher Jet 1800
- Page 1 Jet 1800 850002 Original-Gebrauchsanleitung V2/0616...
-
Page 2: Table Of Contents
4.2 Technical specification ..................23 5. Installation and operation ..................24 5.1 Installation ......................24 5.2 Operation ......................25 6. Cleaning ........................27 7. Waste disposal ......................28 Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:... -
Page 3: Safety
Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. - Page 4 • This device may only be operated in technically proper and safe condition. • Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! • Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device.
-
Page 5: Key To Symbols
• The supply cable must be disconnected from the socket only by pulling the plug. • Never carry or lift the device by the supply cable. • In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur. -
Page 6: Proper Use
CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. 1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. -
Page 7: General Information
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. -
Page 8: Transport, Packaging And Storage
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. -
Page 9: Technical Data
4. Technical data 4.1 Overview of parts Digital display ON/OFF switch LED lighting (red) Lower sensor Upper sensor Air nozzle strips (2) Housing Condensation receptacle - 22 -... -
Page 10: Technical Specification
4.2 Technical specification Hand dryer Jet 1800 Name wall-mounted 850002 Code-No.: Construction: Plastic housing, silver-grey coated Power: 1.8 kW / 230 V 50 Hz Dimensions: W 295 x D 240 x H 650 mm Air flow rate: approx. 47 litres/sec. -
Page 11: Installation And Operation
5. Installation and operation 5.1 Installation Mounting • Unpack the device and remove the packing material. CAUTION! Never remove the nameplate and warning signs from the device. • Prepare everything needed to install the device. • Install the hand dryer so that it is located directly on the way from the sink to the exit, as this will allow the user easy access to the device. -
Page 12: Operation
• Make marks at the desired height for drilling with the fastening plate held up against the wall. Drill holes and place wall plugs 10 inside. Use the supplied screws 11 to mount the fastening plate 9 to the wall. Place the dryer on the fastening plate 9 so that it is securely on the hooks of the •... - Page 13 Digital display Operating mode indicator Time counter Instructional diagram Drying of hands • Place your hands deeply into the air shaft. The upper and lower infrared sensors will be activated and the device will come on automatically. • Warm air will flow from the air nozzles and dry your hands.
-
Page 14: Cleaning
6. Cleaning WARNING! Disconnect the device from the power supply (unplug!) before cleaning. The device is not designed to be rinsed with running water. Do not use a pressure washer to clean the device! Be careful and do not let the water into the device. o Clean the device regularly. -
Page 15: Waste Disposal
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...