Window Slider Kit Installation - Easy@Home EPA080BAUW User Manual

Installation

Window slider kit installation

Your window slider kit has been designed to fi t
most standard vertical and horizontal window
applications, however, it may be necessary for
you to modify some aspects of the installation
procedures for certain types of windows.
Visit www.danby.com for general instruction
videos.
Press the exhaust hose into
the window slider adapter and
unit adapter. The adapters
will automatically clamp to the
exhaust hose using internal
adapter
elastic buckles.
Slide the exhaust hose unit adapter
into the air outlet opening in the
direction of the arrow.
Measure the window opening where the window kit
will be installed and extend the sliders to match the
measurement. If the length of the window opening
requires three window sliders, use the bolt to
fasten the sliders at the proper length.
If the window opening is less than the minimum
length of the window slider kit, use the single slider
that has the hole in it and cut it to the correct size.
Ensure that you do not cut the end of the slider
that has the hole in it, this will be necessary to
attach the exhaust hose assembly.
10