Disassembly; About The Photos Used For Descriptions; The Viewpoint Of Each Photograph - Denon DN-S700 Service Manual

DISASSEMBLY

• Disassemble in order of the arrow of the figure of following flow.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling" it.
SWITCHING POWER
Refer to "DISASSEMBLY 2.SWITCHING POWER
and "EXPLODED VIEW"
SWITCHING POWER
(Ref. No. of EXPLODED VIEW : 8-2)
CD DOOR FRAME ASS'Y
Refer to "EXPLODED VIEW"
CD DOOR FRAME ASS'Y
(Ref. No. of EXPLODED VIEW : 3)
About the photos used for descriptions in the "DISASSEMBLY" section.
• The direction from which the photographs used herein were photographed is indicated at "Direction of photograph: ***" at
the left of the respective photographs.
• Refer to the table below for a description of the direction in which the photos were taken.
• Photographs for which no direction is indicated were taken from above the product.

The viewpoint of each photograph

(Photografy direction)
［View from above］
Direction of photograph: C
TOP / BOTTOM
Refer to "DISASSEMBLY 1.TOP / BOTTOM"
and "EXPLODED VIEW"
TOP
VFD/CONTROL PCB ASS'Y
Refer to "DISASSEMBLY 3.VFD/CONTROL
PCB ASS'Y and "EXPLODED VIEW"
VFD/CONTROL PCB ASS'Y
(Ref. No. of EXPLODED VIEW : 7)
TURNTABLE ASS'Y
Refer to "DISASSEMBLY 4.TURNTABLE ASS'Y
and "EXPLODED VIEW"
TURNTABLE ASS'Y
(Ref. No. of EXPLODED VIEW : 2)
TURNTABLE FRAME
Refer to "DISASSEMBLY 5.TURNTABLE FRAME
and "EXPLODED VIEW"
TURNTABLE FRAME
(Ref. No. of EXPLODED VIEW : 12)
Direction of photograph: B
Direction of photograph: A
5
DN-S700
BOTTOM
SLOT-IN FEEDER MECHA ASS'Y
Refer to "DISASSEMBLY 6.SLOT-IN FEEDER
MECHA ASS'Y and "EXPLODED VIEW"
SLOT-IN FEEDER MECHA ASS'Y
(Ref. No. of EXPLODED VIEW : 5)
MAIN PCB ASS'Y
Refer to "EXPLODED VIEW"
MAIN PCB ASS'Y
(Ref. No. of EXPLODED VIEW : 6)
Direction of photograph: D
Front side