Table of Contents
Advertisement
Quick Links
ANGLE GRINDER
7" WIDE - WATER FEED
AssEMbLy AND OpERATION INsTRucTIONs
Due to continuing improvements, actual product may differ slightly from the product described herein.
Visit our website at: http://www.harborfreight.com
TO pREVENT sERIOus INjuRy, READ AND uNDERsTAND
ALL WARNINGs AND INsTRucTIONs bEFORE usE.
Copyright
2007 by Harbor Freight Tools
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
96100
®
. All rights reserved. No portion of this
®
Advertisement
Table of Contents
Summary of Contents for Central Pneumatic Professional 96100
- Page 1 ANGLE GRINDER 7” WIDE - WATER FEED Model 96100 AssEMbLy AND OpERATION INsTRucTIONs Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com TO pREVENT sERIOus INjuRy, READ AND uNDERsTAND ALL WARNINGs AND INsTRucTIONs bEFORE usE.
-
Page 2: Specifications
Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. Children should not be allowed in the work area. REV 07l For technical questions, please call 1-800-444-3353. SKU 96100 Page 2... -
Page 3: Personal Safety
Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. For technical questions, please call 1-800-444-3353. SKU 96100 Page 3... -
Page 4: Specific Safety Rules And Precautions
[to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead-based paints Crystalline silica from bricks and cement or other masonry products For technical questions, please call 1-800-444-3353. SKU 96100 Page 4... -
Page 5: Assembly Instructions
FIGuRE b To attach the Side Handle (28), firmly screw the threaded portion of the Side Handle into the left or right side of the Front Housing (22). (see Figure b.) For technical questions, please call 1-800-444-3353. SKU 96100 Page 5... - Page 6 Check to make sure your water supply faucet is water hose to the Angle Grinder’s Water Valve (1), using an Adapter (not included) for a typical garden water hose. IMpORTANT: use only cold, clean water. For technical questions, please call 1-800-444-3353. SKU 96100 Page 6...
-
Page 7: Operating Instructions
(see Figure D.) Make sure to store the Air Grinder in a clean, dry, safe location out of reach of chil- dren and other unauthorized people. For technical questions, please call 1-800-444-3353. SKU 96100 Page 7... -
Page 8: Inspection, Maintenance, And Cleaning
Abnormal vibration. Housing Rotor Blades broken or worn out. Have a qualified service technician replace Rotor overheats. Blades. Poor cutting quality. Dull or defective Cutting Wheel. Replace Cutting Wheel. For technical questions, please call 1-800-444-3353. SKU 96100 Page 8... -
Page 9: Parts List And Assembly Diagram
Minor Gear Bushing Cutting Wheel (44) not shown. Bushings (45) not shown. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 96100 Page 9... -
Page 10: Limited 1 Year / 90 Day Warranty
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353. SKU 96100 Page 10...