Weather Band Operation - MB QUART GMR-LED Operator's Manual

AM/FM and Weather Band Operation
Once setup is complete, select between AM or FM icons on the Source
Menu wheel or simply press the SOURCE button to back up to the
source screen showing the current AM or FM frequency.
● Press the ◄ ◄ or ► ►
▌
radio stations one frequency at a time.
● Press the ◄ ◄ or ► ►
▌
seek the next / previous radio stations with strong reception.
● Press and hold buttons 1-4 below the screen to store a preset. Four
AM and four FM preset locations are available on the front panel.
Note: Two more AM and FM presets (5 and 6) are located in the AM and FM setup menus, but
note that 5 and 6 are only accessible through the menu, not the front panel buttons.
● Press the center ►
►
▌ ▐
again to unmute or simply rotate the volume control knob.
FM Screen Example

Weather Band Operation

Select the Weather icon on the Source Menu wheel.
● Press the ◄ ◄ or ► ►
▌
weather band stations one frequency step at a time.
● Press the ◄ ◄ or ► ►
▌
seek the next / previous weather band stations with strong reception.
● Press the center ►
Press ►
▌ ▐
again to unmute or simply rotate the volume control knob.
● Press and hold buttons 1-4 below the screen to store a preset.
Four weather band preset locations are available.
▌
buttons less than 1 second to manually seek
▌
buttons more than 1 second to automatically
▌ ▐
button to mute the AM or FM source. Press
▌
buttons less than 1 second to manually seek
▌
buttons more than 1 second to automatically
▌ ▐
button to mute the weather band source.
Weather Band Screen Example
AM Screen Example
11