Advertisement
Quick Links
Nexkey Core User Manual
Overview
The Nexkey core is electro mechanical core intended as a replacement for a
mechanical lockcore. The core creates a Bluetooth connection between lock and smart
device for access control. It will retrofit into most Key in Knob lock applications. To
confirm compatibility please contact Nexkey (hello@nexkey.com).
Nexkey Electronic Lock Core
Model: COR01
Advertisement
Summary of Contents for Nexkey COR01
- Page 1 Nexkey Core User Manual Overview The Nexkey core is electro mechanical core intended as a replacement for a mechanical lockcore. The core creates a Bluetooth connection between lock and smart device for access control. It will retrofit into most Key in Knob lock applications. To confirm compatibility please contact Nexkey (hello@nexkey.com).
- Page 2 Nexkey Core User Manual Deadbolt Step 1: Remove Existing Thumb-latch ● Position thumb-latch so the screws on the deadbolt are exposed and can be unscrewed. Remove screws entirely from deadbolt and set them aside for step 5. ○ The thumb-latch may include an additional black plate. If so, remove and set aside for step 5.
- Page 3 Step 5: Install Thumb-latch and Core with Nexkey Core ● Insert the core with the Nexkey Core into the front of the door. Make sure the tailpiece is inserted into the deadbolt in the same position as noted in step 1.
- Page 4 Step 6: Insert Nexkey Handle to Nexkey Core ● Insert the Nexkey handle onto the Nexkey Core and secure it with set screw. ● The blue LED on the front of the handle should light up for a brief period of time before turning off.
- Page 5 ● Remove the front plate of the mortise lockset and loosen the set screw that secures the mortise core. ● Unthread the existing mortise core until the fully removed Step 2: Prepare Nexkey Core ● Secure the appropriate CAM onto the backside of the Nexkey Core to match the removed core.
- Page 6 ● Open the Nexkey app on your phone ○ ensure Bluetooth is on and the app is open to the unlock tab ● Tap/push the front face of the Nexkey Smart Lock. The LED will flash slowly to start. ● Turn the Nexkey Smart Lock once the LED is solid blue...
- Page 7 Remove the handle form the Nexkey core using the provided screwdriver • Step 3: Replace existing core with Nexkey Core Remove the existing core and insert the Nexkey Core in the lever and secure the • Core by wedging in the lever fastener.
- Page 8 Nexkey Core User Manual Insert the Nexkey handle onto the Nexkey Core and secure it with set screw. The • front blue LED should light up. Step 4: Reinstall Lever onto Door Insert the lever back into the lever sleeve until it clicks into the door.
- Page 9 Nexkey Core User Manual FCC Compliance Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the COR01 and is the answer not in the manual?
Questions and answers